aspenhome I262-462 Assembly Instructions

aspenhome
Brand
aspenhome
Model
I262-462
Type
Assembly Instructions
Page 1/3
Thank you for purchasing this quality product. Be sure to check all packing material carefully for
small parts that may come loose inside the carton during shipment.
aspenhome
RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
FOR INDOOR USE ONLY
BEFORE USING THIS PRODUCT PLEASE READ, UNDERSTAND, AND FOLLOW THESE INSTRUCTIONS.
Save these instructions for future reference.
TOOLS REQUIRED (NOT PROVIDED)
PHILLIPS SCREWDRIVER
HARDWARE LIST:
No. Description Sketch Quantity
A Bolt Ø1/4" x 2" 8 PCS
B Lock Washer Ø1/4" 8 PCS
C Flat Washer Ø1/4" x 3/4" 8 PCS
D Allen Wrench 4mm 1 PC
COMPONENTS LIST:
No. Description Sketch Quantity
1 Mirror 1 PC
2 Wood Strip 2 PCS
Option 1: Wall Mount
ITEM NO: I262-462 Mirror
I262-462
A (Portrait) B (Landscape)
Option 2: Dresser Mount
I262-453
02-02-2021
Wall Cleat 1 PC3
5 PCS
EWood Screw M3.5 x 2"
Page 2/3
aspenhome
RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
FOR OPTION 1 (Wall Mount)
ITEM NO: I262-462 Mirror
Wall Cleat
STEP 1: Attach the wall cleat with wood screws(E) to wall which the height is 71-1/4" by the landscape way. Attach
the mirror to the wall cleat as shown below.
Wall
A (Portrait) B (Landscape)
E
STEP 2: If you refer to hang the mirror in portrait orientation, remove the mirror cleat.
STEP 3: Attach the mirror cleat with bolts on the mirror frame (short) as shown below(A portrait) . Attach the wall
cleat with wood screws(E) to wall at a height 79-3/4" as shown above . Attach the mirror to the wall cleat.
Note: Ensure the nail/hanger is in a wall stud or wall solid enough to support mirror.
Mirror Cleat
Mirror Cleat
Wall Cleat
Mirror Cleat located in the
back of mirror
Mirror Front
71-1/4" by Landscape
or 79-3/4" by Portrait
Mirror Back
Mirror Back
Mirror Frame (short)
Mirror Frame
(long)
Floor
02-02-2021
Page 3/3
aspenhome
RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
STEP 1: Attach the wood strip to the dresser by using 4 bolts(A), lock washers(B), and flat washers(C). Do not tighten
bolts completely.
Wood Strip
STEP 2: Attach the wood strip to the mirror by using 4 bolts(A), lock washers(B), and flat washers(C). Tighten all
bolts on dresser and mirror with Allen wrench.
B
D
Mirror Back Wood Strip
A
C
A
B
C
D
Wood Strip
Dresser Back
Mirror Back
Dresser Back
Dresser Back
FOR OPTION 2 (Dresser Mount)
ITEM NO: I262-462 Mirror
Dresser Back
01-06-2021
  • Page 1 1
  • Page 2 2
  • Page 3 3

aspenhome I262-462 Assembly Instructions

aspenhome
Brand
aspenhome
Model
I262-462
Type
Assembly Instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents