aspenhome I317-462 Assembly Instructions

aspenhome
Brand
aspenhome
Model
I317-462
Type
Assembly Instructions
Page 1/2
Thank you for purchasing this quality product. Be sure to check all packing material carefully for
small parts that may come loose inside the carton during shipment.
aspenhome
RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
FOR INDOOR USE ONLY
BEFORE USING THIS PRODUCT PLEASE READ, UNDERSTAND, AND FOLLOW THESE INSTRUCTIONS.
Save these instructions for future reference.
TOOLS REQUIRED (NOT PROVIDED)
PHILLIPS SCREWDRIVER
COMPONENTS LIST:
No. Description Sketch Quantity
1 Mirror 1 PC
2 Wood Strip 2 PCS
Option 1: Wall Mount
Option 2: Dresser/Door Chest Mount
A (Portrait) B (Landscape)
I317-462
ITEM NO: I317-462 Landscape Mirror
I317-462
I317-453 I317-457
HARDWARE LIST:
4 PCS
1 PC
No.
A
B
C
D
E
Description Sketch Quantity
Bolt Ø1/4" x 1-3/4" 4 PCS
12 PCS
Bolt Ø1/4" x 1-1/4"
Lock Washer Ø1/4"
Flat Washer Ø1/4" x 3/4"
Allen Wrench 4mm
I317-462
03-18-2021
Wire 1 Set
F
G Bolt Ø1/4" x 5/8" 4 PCS
12 PCS
Page 2/2
aspenhome
RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
FOR OPTION 1 (Wall Mount)
STEP 1: Attach the wood strip to the dresser by using 4 bolts(B), lock washers(C), and flat washers(D). Do not tighten
bolts completely.
FOR OPTION 2 (Dresser / Door Chest Mount)
Wood Strip
STEP 2: Attach the wood strip to the mirror by using 4 bolts(A), lock washers(C), and flat washers(D). Tighten all
bolts on dresser and mirror with Allen wrench.
C
E
Mirror Back Wood Strip
A
D
B
C
D
E
Wood Strip
Mirror Back
A (Portrait)
ITEM NO: I317-462 Landscape Mirror
Dresser/Door Chest Back
Dresser/Door Chest Back
B (Landscape)
03-18-2021
STEP 1: If you refer to hang the mirror in landscape orientation as shown in Diagram B. Lay the mirror face down on a
soft surface. Attach the wire to mirror by using 4 bolts(F), lock washers(C) and flat washers(D).
If you refer to hang the mirror in portrait orientation, then attach the wire as shown in Diagram A.
STEP 2: After attaching nail/hanger to wall, place wire over nail/hanger and slowly lower the mirror into place. Make
sure the wire catches on the nail/hanger.
Note: Ensure the nail/hanger is in a wall stud or wall solid enough to support mirror.
Wire F
C
D
E
Wire
GG
  • Page 1 1
  • Page 2 2

aspenhome I317-462 Assembly Instructions

aspenhome
Brand
aspenhome
Model
I317-462
Type
Assembly Instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents