TA100&TA200 ATA Installation Guide
Yeastar TA100/200 provides 1 or 2 analog interfaces to convert existing analog
equipment to IP-based networks.
Unpack the product package and check the items against the following checklist.
• Device Unit × 1
• USB Power Adapter × 1
• USB Cable × 1
• Network Cable × 1
• Warranty Card × 1
• Quick Installation Guide × 1
Caution
Use only the dedicated power adapter with the device. The warranty does not cover
any damage caused by the use of other power adapters.
① Power indicator
② Mirco USB port: for connection to PC or USB
Power Adapter
③ LAN port: for connection to your router or
broadband network device.
①
② ① Phone ports: for connection to analog phones
③ or fax machines.
1. TA100/200 will obtain IP address through DHCP server. Use an analog phone,
press *** to get into the Voice Menu.
Enter 1 to obtain the IP.
2. If there is no DHCP server in the network, press 3 for advanced setting (password:
123456), and press 2 to assign a static IP address.
3. In the address bar of Web browser, enter the IP address.
Web Configuration Panel Login