Maxxima MRL-41300W Installation guide

Brand
Maxxima
Model
MRL-41300W
Type
Installation guide

This manual is also suitable for

Electrical parameters:
2.
4" LED Retrofit-Kit Installation Instructions
ese instructions Type luminaires.
WARNING / ATTENTION
4.
5.
other
1.
If luminaire (fixture) is to be switched from a wall switch, make sure black power supply wire
is connected to the switch. DO NOT connect the white supply wire to the switch.
413, MRL-41300NW
4 3
1.
. Supply conductors (power wires) connecting to the fixture must be rated 90°C.
If uncertain consult an electrician.
3.
CAUTIONS
1. For your safety read and understand instructions completely before starting installation.
2.
Before attempting Installation, check your local electric code, as it sets wiring standards for
NOTES
qualified electrician.
your locality.
6. This lamp is not intended for use with emergency exit fixtures or emergency lights.
2. Make sure no bare wires are exposed outside the wire nut connectors.
3.
during kits installation.
4. These fixtures are suitable for Damp locations.
Approved Dimmers
Almond: LUXDM600-12
Legrand:
HCL453PTC, RHCL453PW, ADPD453LW2,
ADWR703HW4
Leviton: 6631, 6672, 6681, 6683, 6684, IPL06, IPI06-1LZ
Lutron:
CT-103P, D-600PH-DK, DV-603PH, DV-600PH,
S-600, S-600H, S-10PH, D-600RH-DK, TG-600PH, D-600R,
MACL-153M, MACL-153MR, MACL-153MH, MACL-153MLH,
MACL-153MLRHW, AYCL-153P, AYCL-153PH, DVCL-153P,
DVCL-153PR, CTCL-153P, CTCL-153PDH, DVCL-253P
Maxxima: MEW-DM600, MEW-DM620, MEW-DM650
www.maxximastyle.com
Luminous Intensity Distribution Diagram
Five Year Warranty:
Maxxima extends a 5 year limited warranty to the original purchase that the products listed are free from defects in material and/or
workmanship only. Maxxima will replace any warranteed product to the original consumer/purchaser if the product fails because of defects
due to workmanship and/or materials within the limited warranty period.
Limited warranty is not transferable and applies to the original
installation of the Maxxima product. This offer does not constitute in any way a product guarantee and Maxxima does not hereby
assume any obilgation whatsoever beyond sending a free replacement product.
Installation Into Recessed Housing:
STEP1:
. Remove the existing diffuser,
bulb and trim as applicable.
STEP2: Screw E26 socket adapter provided into socket
in housing. (Figure 1)
STEP3: Plug the connector of the retrofit kit
into the connector of the socket adapter
assembly. (Figure 2)
STEP4: Tuck all wires into the housing and
carefully p
(Figure
3
)
Figure 3
Figure 1
Figure 2
Housing Dimensions
Minimum Housing Dimensions:
4.4" (DIA) X 5.5" (H)
5.4"
2.0"
18
A
W
G
S
O
L
I
D
5.4"
2.0"
1.1"
0.9"
3.9"
2.9"
  • Page 1 1
  • Page 2 2

Maxxima MRL-41300W Installation guide

Brand
Maxxima
Model
MRL-41300W
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents