1
2
3
Tools required:
1/8” Allen Drive
Parts Included:
(1) Shelf Assembly
Remove (4) four #10-24 x 5/8” Long
Flat Head Socket Cap Screws from the
side panels of Upper Track Assembly
(See Fig. A)
Place Shelf Assembly on upper
track assembly (See Fig. B).
Make sure that the four (4)
holes on the Shelf Assembly are
aligned with the four holes on
the Upper Track Assembly (See Fig C).
Fasten Shelf Assembly to Upper Track
Assembly with (4) four #10-24 x 5/8”
Long Flat Head Socket Cap Screws
(See Fig. C).
(Fig. A)
(Fig. B)
(Fig. C)
62XX-501-33
9A484001
Installation Instructions
INS-9A484001 (Rev.A)
Midmark Corporation | 60 Vista Drive | PO Box 286 | Versailles, Ohio 45380-0286 | USA | midmark.com
