2. Computers & electronics
  3. Telecom & navigation
  4. Holders
  5. PROAIM
  6. MA-293-00

PROAIM MA-293-00 User manual

  • Hello! I've reviewed the Assembly Manual for the Proaim Euro/Elemac to Mitchell Riser Adapter Cinema Series MA-293-00. This manual details how to assemble and use the adapter to raise your camera setup, mount fluid heads, and secure your camera. It also mentions accessory mounting threads. I'm ready to answer any questions you might have about its features or setup process.
  • What is the Proaim Euro Base to Mitchell Camera Riser used for?
    How do you mount the Mitchell Riser Adapter?
    What kind of mounting threads are available on the adapter?
1
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
Euro/Elemac to Mitchell Riser Adapter
(MA-293-00)
Assembly Manual
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
What’s In The Box
Proaim Euro/Elemac to Mitchell Riser Adapter
2
Euro to Mitchell Riser Adapter Setup
• Loosen the ratchet knob of the Mitchell Riser
Adapter and mount it on the euro adapter
quick lock (Not Included), as shown in the
image.
• Secure the Mitchell Riser Adapter using the
ratchet knob.
NOTE: Proaim Euro Base to Mitchell Camera
Riser is used to raise the height of your camera
setup.
• Now, the Mitchell Riser Adapter is properly
mounted.
NOTE: You can aach it to any Dolly or Bazooka
via Euro Mount Adapter.
• Loosen and remove the castle nut of the
Mitchell Fluid Head (Not Included) and mount
it on the Mitchell mount, as shown in the
image.
• Re-insert the castle nut from the boom and
ghten it.
• Remove the plate of the Fluid head by
pressing the buons present on it and aach it
to the camera (Not Included), as shown in the
image.
3
• Securely ghten the plate using an Allen key
and slide it onto the Fluid Head.
• Now, secure the camera (Not Included) using
the locking lever, as shown in the image.
YOUR PROAIM EURO/ELEMAC TO MITCHELL RISER ADAPTER
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
NOTE: It allows easy mounng of Mitchell mount
products. It has various ¼”-20 and ⅜”-16
accessory mounng threads.
4
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon and
evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our utmost
support and care unl you use our product.
/