FLYCAM FLCM-QR User guide

Hello! I've reviewed the Assembly Manual for the FLYCAM Quick Release Adapter Plate FLCM-QR, and I'm ready to assist you with any questions you have. This manual provides detailed information on setting up the adapter, mounting your camera, and adjusting its position. It also includes important warranty and liability information.
How to remove the quick release plate?

Where can I mount the quick release adapter?

How to secure the camera on the quick release plate?

What’s In The Box

Please inspect the contents of your shipped package to ensure you have received everything that

is listed below.

Quick Release Adapter Plate (FLCM-QR)

No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,

electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright

statutes or in wring by the Publisher.

A s s e m b l y M a n u a l

Quick Release Adapter Quick Release Plate

Plate Release Pin

Ratchet

Tightening Knob

3/8” -16 Mounng Bolt

1/4” - 20 Mounng Bolt

Pin for HD Cameras

 Loosen the ratchet knob of quick release

adaptor and remove the quick release plate

by sliding it.

 Aach the uid head plate (Not Included) on-

to the boom side of quick release adapter

then ghten the screw with the help of screw

 Now mount quick release plate by sliding into

the quick release adapter and press the side

buon to move the camera forward according

to your requirement.

Quick Release Adapter Plate Setup

 Now, aached the uid head plate (Not In-

cluded) and quick release adaptor onto the

uid head and secure it properly.

 Aer camera sliding seng ghten the

ratchet knob to secure it properly.

 Mount your camera on quick release plate

then ghten the screw with the help of screw

driver.

Note: You can mount it on Tripod, Rail System, Sliders

etc. We are providing 1/4"-20 threaded slots for

mounng.

YOUR FLYCAM QUICK RELEASE ADAPTER PLATE

ALL DRESSED UP AND READY TO GO!

(SHOWN WITH OPTIONAL ACCESSORIES)

Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,

we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it

cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon

and evaluaon by us.

Liability: We are not liable for damage caused by products that we do not supply or from mishandling in

transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.

utmost support and care unl you use our product.

FLYCAM FLCM-QR User guide

Related papers

Other documents