PROAIM SL-FLPR-3 User manual

1

Please inspect the contents of your shipped package to ensure you have received everything that is listed

below.

Flyking PRO 3 Mitchell Video Camera

Slider for Videomakers (SL-FLPR-3)

Assembly Manual

No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,

electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright

statutes or in wring by the Publisher.

What’s In The Box

Proaim Flyking Pro Slider 4 with Mitchell Key

Bag Packing

2

Flyking PRO 3 Mitchell Slider Setup

• Loosen the castle ring present at the backside

of the Mitchell Slider using a castle wrench.

• Aer loosening the castle ring, remove it from

the Mitchell slider.

• Mount the Mitchell slider on a Mitchell stand

(Not Included), as shown in the image.

• The Mitchell Slider is successfully mounted on

the Mitchell stand (Not Included).

• Aer mounng the slider, re-insert the castle

ring from the boom of the slider.

• Now, ghten the castle ring using a castle

wrench.

• The castle ring has been properly aached to

the slider, ensuring a secure aachment

between the slider and the Mitchell stand

(Not Included).

3

• The lever of the Mitchell Slider can be used to

move it in a panning move per your

requirement.

• Loosen the magnec stoppers and move them

to the desired posion.

NOTE: Adjust the rail length per your shoong

requirement by seng the magnec stoppers at

the desired length.

• Loosen and remove the castle ring of the Fluid

head (Not Included).

• Posion the magnec stopper anywhere on

the rail and secure the posion by ipping the

knob.

NOTE: The slider is equipped with adjustable

magnec stoppers that minimize the jarring

caused by sudden slide stops during gliding

shots, ensuring a smooth, jerk-free nish.

• Mount the Fluid head (Not Included) on the

Mitchell slider.

NOTE: It provides a full 360° sweeping pan with

an easy-to-use lever that safely locks the

carriage in your desired posion.

4

• Aer mounng the Mitchell uid head

(Not Included), ghten the castle ring from the

boom to secure the Fluid head.

• Press the knob of the Fluid head and release

the top plate.

• Aach the top plate of the uid head with the

Camera (Not Included) by matching their

threads and secure them using a screwdriver.

• Aer mounng the Camera, press the locking

lever of the uid head to lock the aachment.

• Slide the Camera (Not Included) onto the Fluid

head.

• Loosen the knob of the Mitchell plate of the

slider and move the plate per your

requirement.

5

• You can rmly lock the posion of the Mitchell

plate using the knob, as shown in the image.

NOTE: With a minimum working height of 13cm,

the slider lets users capture shots from a

relavely lower angle.

Features: The Slider features a stronger-than-

ever braking system with adjustable magnec

stoppers that minimize the jarring caused by

sudden slide stops during gliding shots, ensuring

a smooth, jerk-free nish.

• The Slider is ready to use.

YOUR PROAIM FLYKING PRO 3FT MITCHELL VIDEO CAMERA SLIDER

ALL DRESSED UP AND READY TO GO!

(SHOWN WITH OPTIONAL ACCESSORIES)

6

Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,

we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it

cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon and

evaluaon by us.

Liability: We are not liable for damage caused by products that we do not supply or from mishandling in

transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.

Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our utmost

support and care unl you use our product.

PROAIM SL-FLPR-3 User manual

PROAIM SL-FLPR-3 User manual

Related papers

Other documents