PROAIM CM-SSHT-01 User manual

1

Please inspect the contents of your shipped package to ensure you have received everything that is listed

below.

Smart Side Camera Car Mount Hostess

Tray Kit (CM-SSHT-01)

Assembly Manual

No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,

electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright

statutes or in wring by the Publisher.

What’s In The Box

Cheese Plate With Mitchell Mount

2 x Feet Holder

Extruded Rail

2 x Plaorm

Extruded Rail

2 x Safety Belts

2 x Door Hooks

3 x Centre

Support

Extruded Rail

2 x Side

Support

Extruded Rail

2 x Adjustable Supporve

Feet

6mm Allen Key

4 x Bolts with Washer

2

FUNCTION

Gear for Tilng Movement

Extruded Rail

Cheese Plate with Mitchell Mount

for Camera Mounng

Cheese Plate

Perfectly Aaches to Car Door

Via L-Shaped Door Hooks

Hooks

Adjustable Supporve Feet

Feet

Knob

Perfectly Secure the Rails

Allows rm mounng for

smooth shots

Mitchell Mount

3

Hostess Tray Kit Setup

• Using the Allen key, loosen the clamp bolt in

the Feet Holder Extruded Rail.

• Insert the adjustable supporve feet in the

clamp.

• Re-ghten the bolt using to Allen key to secure

the feet.

• Loosen the bolt to slide up and down.

• The Feet Holder Extruded rail clamp can slide

up or down per your requirement.

• Loosen the knob of the Centre Support

Extruded Rail.

• Remove the bolt from the rail, as shown in the

image.

4

• Repeat the same procedure to remove the

bolt from the other side of the Rail.

• Slide the bolt down the channel of the Feet

Holder Extruded Rail.

• Now, insert the bolt in the Centre Extruded

Rail as shown in the image.

• Tighten the bolt on the Centre Extruded Rail.

• Slide the Side Support Extruded Rail down the

Plaorm Rail, as shown in the image.

• Now, ghten the knob and slide the plaorm

rail down the Feet Holder Extruded Rail.

5

• Tighten the knob shown in the image to

secure the Rails together.

• Loosen the knob of the Centre Support

Extruded Rail.

• Aach the Centre support rail to the Feet

Holder Extruded Rail and re-ghten the knob.

• Remove the rubber caps from the Plaorm

Extruded Rails.

NOTE: Rubber supports are aached at the ends

to distribute the camera weight and evenly sta-

bilize the setup.

• The Plaorm Rails are ready to be aached to

the Centre Support Extruded Rail.

• Aer aaching the Centre Support Extruded

Rail, ghten the knobs to secure it properly.

6

• The image shows how all the aached

Extruded Rails will look like.

• Aach the L-Shaped door hooks to the Feet

Holder Extruded Rail.

• Tighten the Hooks using the Allen key.

• The hook can slide forward or backward by

loosening its bolt.

• Aach the Cheese Plate to the Plaorm Ex-

truded Rail and insert & ghten its bolt using

the Allen key, as shown in the image.

Feature: It features a 14 x 14" aluminum cheese

plate with a Mitchell mount that allows rm

mounng for smooth shots.

• Tighten all the bolts to secure the Cheese

Plate.

Feature: The rods facilitate height adjustment,

and the cheese plate can be easily posioned

with its easy back & forth movement.

7

• The Cheese plate is appropriately mounted on

the rail, as shown in the image.

• Mount the L-Shaped hooks to the car door.

Feature: Robustly built L-shaped door hooks

aach to the car door, providing excellent stabil-

ity to the tray kit.

• Loosen and remove the Castle Ring of the Fluid

Head (Not Included).

• Mount the Fluid Head (Not Included) on the

Mitchell mount of the Cheese plate.

• Secure the Fluid Head (Not Included) by ght-

ening the Castle Ring from the boom, as

shown in the image.

• Unlock the locking lever of the Fluid Head.

8

• Push the knob of the uid head to remove its

top plate.

• Aach the top plate with the Camera

(Not Included) and ghten them using the

Allen key.

• Slide the plate to the Fluid Head (Not Included)

and lock its lever.

• The camera (Not Included) is safely mounted,

as shown in the image.

Feature: The Tray kit is designed to mount lm

and video cameras to the side doors of a car for

prole shots through the window or

point-of-view shots out the window.

• Wrap the safety belt around the channels for a

more secure setup.

Feature: Its extruded rods spread across the

model, guaranteeing maximum strength and

perfect connecon via the adjustable supporve

feet and safety belts.

• Connect the safety cable to the car for beer

aachment, as shown in the image.

9

• Tighten the safety belt to fully secure it.

• Your setup is ready to use!

Feature: The Smart Side Mount Hostess Tray Kit

is designed to save you me and deliver

hassle-free car shots while providing stability and

security.

YOUR PROAIM SMART SIDE CAMERA CAR MOUNT HOSTESS TRAY KIT

ALL DRESSED UP AND READY TO GO!

(SHOWN WITH OPTIONAL ACCESSORIES)

Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,

we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it

cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon and

evaluaon by us.

Liability: We are not liable for damage caused by products that we do not supply or from mishandling in

transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.

Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our utmost

support and care unl you use our product.

PROAIM CM-SSHT-01 User manual

PROAIM CM-SSHT-01 User manual

Related papers

Other documents