Addonics Technologies ADCTEU31 User manual

Brand
Addonics Technologies
Model
ADCTEU31
Type
User manual

Addonics Technologies ADCTEU31

The Addonics Technologies ADCTEU31 is a USB 3.0 to SATA 6Gb/s bridge adapter that allows you to connect a SATA hard drive or solid state drive to your computer via USB 3.0. This can be useful for transferring data between your computer and a SATA drive, or for using a SATA drive as an external storage device. The ADCTEU31 supports UASP (USB Attached SCSI Protocol), which can improve the performance of SATA drives when used with a USB 3.0 port. The ADCTEU31 also supports SATA 6Gb/s, which provides faster data transfer speeds than SATA 3Gb/s.

Here are some of the features and possible use cases of the Addonics Technologies ADCTEU31:

Addonics Technologies ADCTEU31

The Addonics Technologies ADCTEU31 is a USB 3.0 to SATA 6Gb/s bridge adapter that allows you to connect a SATA hard drive or solid state drive to your computer via USB 3.0. This can be useful for transferring data between your computer and a SATA drive, or for using a SATA drive as an external storage device. The ADCTEU31 supports UASP (USB Attached SCSI Protocol), which can improve the performance of SATA drives when used with a USB 3.0 port. The ADCTEU31 also supports SATA 6Gb/s, which provides faster data transfer speeds than SATA 3Gb/s.

Here are some of the features and possible use cases of the Addonics Technologies ADCTEU31:

Technical Support
If you need any assistance to get your unit functioning properly, please have your
product information ready and contact Addonics Technical Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: 408-453-6212
Email: http://www.addonics.com/support/query/
v4.1.11
T E C H N O L O G I E S
www.addonics.com
www.addonics.com
Phone: 408-573-8580
Fax: 408-573-8588
Email: http://www.addonics.com/sales/query/
CONTACT US
Connecting the ADCFAEU3 using eSATA
Connecting the ADCFAEU3 using USB
User Guide
USB 3.0/eSATAp CFast Reader/writer
(ADCFAEU3)
eSATAp cable
Connecting the CFast reader to a eSATAp port
1 2
www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
Connecting the ADCFAEU3 using eSATAp
Hot Swapping drives
The ADCFAEU3 unit supports hot swapping (inserting or removing drives
while the drives are running and connected to a computer). The ADU3ESA
USB 3.0 to eSATAp adapter supports hot swapping. When connecting
directly to the computer using eSATA or eSATAp, the controller on the com-
puter must also support hot swapping - be sure to confirm this before
attempting to insert or remove drives while the system is running.
Always be sure to practice the appropriate safe removal procedure before
removing a media device. Failure to practice safe removal procedures will
result in loss or corruption of data.
Connecting the ADCFAEU3 Using eSATAp
Simply connect the eSATAp cable between the card reader and the com-
puter's eSATAp connector.
Connecting the ADCFAEU3 Using eSATA
Connect the eSATAp cable between the card reader and the computer's
eSATA connector. Also connect the USB 2.0 A to mini-B cable between the
card reader and a USB connector on the computer.
Connecting the ADCFAEU3 Using USB
Connect the eSATAp cable between the card reader and the ADU3ESA
adapter's eSATAp port. Then connect the ADU3ESA directly to the com-
puter's USB port.
Unpacking and Overview
CFAST Card Slot
Hybrid eSATA
(eSATAp) or regular
eSATA port
USB power port
Power and
CFAST activity LEDs
eSATAp Cable
USB 2.0 A to mini-B cable
Connecting the CFast reader using eSATA cable
Connecting the CFast reader using eSATA cable
Connecting the CFast reader to eSATA port
  • Page 1 1
  • Page 2 2

Addonics Technologies ADCTEU31 User manual

Brand
Addonics Technologies
Model
ADCTEU31
Type
User manual

Addonics Technologies ADCTEU31

The Addonics Technologies ADCTEU31 is a USB 3.0 to SATA 6Gb/s bridge adapter that allows you to connect a SATA hard drive or solid state drive to your computer via USB 3.0. This can be useful for transferring data between your computer and a SATA drive, or for using a SATA drive as an external storage device. The ADCTEU31 supports UASP (USB Attached SCSI Protocol), which can improve the performance of SATA drives when used with a USB 3.0 port. The ADCTEU31 also supports SATA 6Gb/s, which provides faster data transfer speeds than SATA 3Gb/s.

Here are some of the features and possible use cases of the Addonics Technologies ADCTEU31:

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents