Addonics Technologies ZESU3CS User manual

Technical Support

If you need any assistance to get your unit functioning properly, please have your

product information ready and contact Addonics Technical Support at:

Hours: 8:30 am - 6:00 pm PST

Phone: 408-453-6212

Email: http://www.addonics.com/support/query/

v8.1.11

T E C H N O L O G I E S

www.addonics.com

User Guide

Z USB 3.0 / eSATA Drive Enclosure

(ZESU3CS)

www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/

Unpacking and Overview

www.addonics.com

Phone: 408-573-8580

Fax: 408-573-8588

Email: http://www.addonics.com/sales/query/

Installation

1. Loosen the two cover screws on the back of the unit found on

the left and right edges.

2. Install a 2.5", 3.5" or 5.25" SATA device into the tray.

3. Reassemble the unit.

4. Connect the power supply from an AC outlet to the back of the

unit.

5. Connect an eSATA or USB host to the unit and turn it on.

NOTE: When connecting the unit to a host using USB, there must

be no cable connected to the eSATA port on the back of the unit.

Power SupplyeSATA cable USB cable

Download PDF