Addonics Technologies AE6CF User manual

Brand
Addonics Technologies
Model
AE6CF
Category
Signal cables
Type
User manual

This manual is also suitable for

Technical Support
If you need any assistance to get your unit functioning properly, please have your
product information ready and contact Addonics Technical Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: 408-453-6212
Email: http://www.addonics.com/support/query/
v3.1.11
www.addonics.com
T E C H N O L O G I E S
User Guide
CF or CFast Drive
(AE6CF / AE6CAS)
www.addonics.com
Phone: 408-573-8580
Fax: 408-573-8588
Email: http://www.addonics.com/sales/query/
CONTACT US
Removing Cover of CF / CFAST Drive
To remove the top cover of the CF / CFast Drive, loosen the 4 screws located at the
side of the device using a Philips screwdriver by turning counter-clockwise.
Separate the metal casing of the drive from the housing by lifting up the casing.
Cable Connections
Data Cable
Each of the 6 SATA data cables will need to be connected to a SATA port.
Power Cable
Two 4-pin molex power connectors from the power supply will connect to the 4-pin
molex power cable on the CF/CFast drive. This will power all six slots on the
CF/CFast drive.
Installing CF / CFAST cards into the CF Drive
Slide the CF card into each of the slot on the CF / CFAST Drive.
Note: It is recommended to fill up the CF / CFAST Drive with CF / CFAST cards
from top to bottom, left to right. This is to help in identifying which cards connect to
which ports for easier troubleshooting.
Top Cover Screws
  • Page 1 1
  • Page 2 2

Addonics Technologies AE6CF User manual

Brand
Addonics Technologies
Model
AE6CF
Category
Signal cables
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents