PAC BKNDK738CG User manual

PAC
Brand
PAC
Model
BKNDK738CG
Type
User manual

This manual is also suitable for

PAC BKNDK738CG is a mounting kit that allows you to install an aftermarket radio into your Nissan Altima Sedan 2013. The kit includes brackets, screws, and a pocket to hold the radio in place. It is compatible with both single ISO mount and double DIN mount applications. The kit also includes a rear support bracket to support the weight of the radio. With this kit, you can easily replace your factory radio with an aftermarket radio that has the features and functionality you want.

PAC BKNDK738CG is a mounting kit that allows you to install an aftermarket radio into your Nissan Altima Sedan 2013. The kit includes brackets, screws, and a pocket to hold the radio in place. It is compatible with both single ISO mount and double DIN mount applications. The kit also includes a rear support bracket to support the weight of the radio. With this kit, you can easily replace your factory radio with an aftermarket radio that has the features and functionality you want.

CUSTOMER HELP LINE
USA 800-323-4329 • Canada 800-245-8777
iNDK738CG
Automotive Products Division
1040 Avenida Acaso • Camarillo, CA 93012, U.S.A.
USA Sales (800) 336-6500
Canada Sales (888) 922-3006 • USA Fax (805) 388-7950
For information about other American International automotive
accessories visit our website at:
http://www.americaninternational.net
NDK738CG Mounting Kit
Nissan
2013 ALTIMA SEDAN
VEHICLE APPLICATIONS
©2013 AMERICAN INTERNATIONAL INDUSTRIES, INC.
TECH Ver. 7/13 PRINT Ver. 7/13
IMB738CG LEFT
IMB738CG RIGHT
DASH DISASSEMBLY AND RADIO REMOVAL
1 2
KIT ASSEMBLY INSTRUCTIONS
Note: This kit is an (ISO) mounting kit only. The mounting sleeve of your new radio
cannot be used when ISO mounting an aftermarket radio.
1. Insert pocket into lower section of the NDK738 brackets. See fig A
2. Insert ISO mountable radio between ISO mount brackets and loosely attach to sides
of radio using screws provided with radio when possible, or screws supplied with kit.
3. Slide radio forward or backward for desired look and tighten screws.
4. Test fit kit/radio by mounting the brackets to the sub dash using the (4) OEM screws,
and making sure the main frame of the NDK738 aligns correctly and does not leave
any gaps when installed. If everything looks correct go to step #5. If not, go back to
step # 3.
5. Suggested…Attach a rear support bracket to the rear of the new radio and adjust as
necessary to support the weight of the radio.
NOTE: If there is an OEM A/C module present you can install it to the NDK738 brackets
using the OEM screws.
IMB738CG LEFT
IMB738CG RIGHT
Single ISO Mount Applications
Double DIN Mount Applications
See Fig B
1. Insert Double DIN radio between ISO mount brackets and loosely attach to sides of
radio using screws provided with radio when possible, or screws supplied with kit.
2. Slide radio forward or backward for desired look and tighten screws.
3. Test fit kit/radio by mounting the brackets to the sub dash using the (4) OEM
screws, and making sure the main frame of the NDK738 aligns correctly and does
not leave any gaps when installed. If everything looks correct go to step #4. If not,
go back to step # 3.
4. Suggested…Attach a rear support bracket to the rear of the new radio and adjust
as necessary to support the weight of the radio.
NOTE: If there is an OEM A/C module present you can install it to the NDK738 brackets
using the OEM screws.
Fig A
Fig B
1. With a soft tool loosen the dash panel to the lower right of the steering wheel.
2. With a soft tool remove the silver dash trim from both the left and right side of
the radio/climate controls.
3. Remove the panel from below the climate controls.
4. Remove (4) Phillips Screws securing the radio, climate controls and air vents.
5. Remove climate controls and air vents, unplug all harnesses.
6. Remove (4) Phillips screws securing the radio brackets to the sub dash.
7. Remove radio and unplug all harnesses and antenna connections.
KIT ASSEMBLY INSTRUCTIONS
MAIN FRAME
MAIN FRAME
POC738
  • Page 1 1
  • Page 2 2

PAC BKNDK738CG User manual

PAC
Brand
PAC
Model
BKNDK738CG
Type
User manual
This manual is also suitable for

PAC BKNDK738CG is a mounting kit that allows you to install an aftermarket radio into your Nissan Altima Sedan 2013. The kit includes brackets, screws, and a pocket to hold the radio in place. It is compatible with both single ISO mount and double DIN mount applications. The kit also includes a rear support bracket to support the weight of the radio. With this kit, you can easily replace your factory radio with an aftermarket radio that has the features and functionality you want.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents