PAC HYNK1137 User manual

PAC
Brand
PAC
Model
HYNK1137
Type
User manual

This manual is also suitable for

PAC HYNK1137 is a mounting kit designed to help you install an aftermarket radio into your 2006-08 Hyundai Sonata. It includes all the necessary hardware and instructions to make the installation process quick and easy. With the HYNK1137, you can enjoy your new radio without having to worry about any fitment issues.

PAC HYNK1137 is a mounting kit designed to help you install an aftermarket radio into your 2006-08 Hyundai Sonata. It includes all the necessary hardware and instructions to make the installation process quick and easy. With the HYNK1137, you can enjoy your new radio without having to worry about any fitment issues.

Automotive Products Division
1040 Avenida Acaso • Camarillo, CA 93012, U.S.A.
USA Sales (800) 336-6500
Canada Sales (888) 922-3006 • USA Fax (805) 388-7950
For information about other American International automotive
accessories visit our website at:
http://www.americaninternational.net
CUSTOMER HELP LINE
USA 800-323-4329 • Canada 800-245-8777
HYNK1137 Mounting Kit
Hyundai
2006-08 SONATA
VEHICLE APPLICATIONS
iHYNK1137
©2012 AMERICAN INTERNATIONAL INDUSTRIES, INC.
TECH Ver. 9/12 PRINT Ver. 9/12
1 2
1. Open the glove box, and remove the (2) phillips screws from the upper front edge of
the glove box.
2. Carefully pry the thin curved dash trim panel outward and remove.
(Note: This part goes from above the ignition key to above the glove box area).
3. Remove the (1) phillips screw securing the lower edges of each side trim located
beside the radio.
4. Carefully pry these individual side trims forward to release. (Note: be sure to not
loose the retainer clips). Disconnect the attached harnesses and remove trim pieces.
5. Remove the (2) phillips screws securing the lower edge of the factory radio to
the sub-dash.
6. Remove the (4) phillips screws securing the radio to the sub-dash, pull radio forward,
disconnect all wire harnesses and antenna lead and remove radio.
DASH DISASSEMBLY
INSTALLATION INSTRUCTIONS
NOTES
1. Insert radio between ISO mount brackets and loosely attach to sides of radio using
screws provided with radio when possible or hardware included with kit.
2. Slide radio component forward or backward for desired look and tighten screws.
3. Test fit kit/radio by mounting it using the (2) OEM screws, and making sure the main
frame of the HYNK1137 aligns correctly and does not leave any gaps when installed.
If everything looks correct go to step #4. If not, go back to step # 2.
4. Attach the metal panel fastener clip from the factory radio (1) to the mounting tab on
the back side of the HYNK1137 panel.
5. Suggested… Attach a rear support bracket to the rear of the new radio
and adjust as necessary
Fig. A
  • Page 1 1
  • Page 2 2

PAC HYNK1137 User manual

PAC
Brand
PAC
Model
HYNK1137
Type
User manual
This manual is also suitable for

PAC HYNK1137 is a mounting kit designed to help you install an aftermarket radio into your 2006-08 Hyundai Sonata. It includes all the necessary hardware and instructions to make the installation process quick and easy. With the HYNK1137, you can enjoy your new radio without having to worry about any fitment issues.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents