2. V I V O
  3. DESK-DR33-B
DESK-DR33-B

V I V O DESK-DR33-B User manual

  • Hello! I’ve reviewed the instruction manual for the VIVO Under Desk Drawer DESK-DR33-B. This document provides detailed steps on how to assemble the drawer as a standard drawer or a keyboard tray. It also covers mounting the drawer under a desk, ensuring safe usage within the 11 lbs weight limit. I'm ready to answer any questions you have about the device or its installation process.
  • What is the maximum weight capacity for this drawer?
    What tools are needed for assembly?
    What should I do if I have doubts about the safety of the installation?
Scan the QR code with your mobile device or follow the link
for helpful videos and specications related to this product.
Instruction Manual
https://vivo-us.com/products/desk-dr33-b
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
Black Extra Long Under Desk Drawer
SKU: DESK-DR33-B
2
PACKAGE CONTENTS
11lbs
(4.99kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
WARNING!
Phillips
Screwdriver
If you do not understand these directions, or if you have any doubts about the safety of the installation,
please call a qualied technician. Check carefully to make sure there are no missing or defective parts.
Improper installation may cause damage or serious injury. Do not use this product for any purpose that is
not explicitly specied in this manual. Do not exceed weight capacity. We cannot be liable for damage or
injury caused by improper mounting, incorrect assembly or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
A (x1)
Le Bracket
NOTE: 2 Extra screws have been included of each
TOOLS NEEDED
B (x1)
Right Bracket
C (x1)
Base
D (x1)
Front Wall
S-A (x4)
M5x5mm Screw
S-B (x10)
M5x12mm Screw
E (x1)
Back Wall
F (x1)
Template
W-A (x4)
M5x16mm Screw
W-B (x4)
M5 Washer
3
ASSEMBLY OPTION A: DRAWER
STEP 1
STEP 2
Remove the shipping straps from Le Bracket (A) and Right Bracket (B). Assemble Le Bracket (A) and
Right Bracket (B) to Base (C) using M5x12mm Screws (S-B) and a Phillips screwdriver.
Assemble Front Wall (D) to assembly using M5x5mm Screws (S-A) and a Phillips screwdriver.
A
S-B
C
B
D
S-A
4
STEP 3
STEP 4
Assemble Back Wall (E) to assembly using M5x5mm Screws (S-A) and a Phillips screwdriver.
Flip assembly over and secure under side of Front Wall (D) and Back Wall (E) with M5x12mm
Screws (S-B) and a Phillips screwdriver.
E
S-A
S-B
D
E
5
ASSEMBLY OPTION B: KEYBOARD TRAY
STEP 1
STEP 2
Push down on Right Side Bracket (B) Rail Release Lever to release, then separate the Outer Rail (B1)
from Inner Rail (B2).
Release
Lever
Release
Lever
B
AA1
A2
A2
A3
B2
B1
Push up on Le Side Bracket (A) Rail Release Lever to release, then separate the Outer Rail (A1) from
Inner Rail (A2).
B2
B3
Use a Phillips screwdriver to remove Rail (B3, A3) from the lower holes in Inner Rail Brackets (B2, A2).
6
STEP 3
Install Rails (B3, A3) into upper holes of Inner Rail Brackets (B2, A2) with a Phillips screwdriver.
Reconnect Outer Rails (B1, A1) to Inner Rail Brackets (B2, A2).
A2
A3
B2
B2
B1 A1
A2
B3
STEP 4
Attach Le Side Bracket (A) and Right Side Bracket (B) to Base (C) using M5x12mm Screws (S-B)
and a Philips screwdriver.
C
B
S-B
A
7
STEP 5
Assemble Back Wall (E) to assembly using M5x5mm Screws (S-A) and a Phillips screwdriver.
Secure underside of Back Wall (E) with M5x12mm Screws (S-B) and a Phillips screwdriver.
E
S-B
E
S-A
8
MOUNTING INSTRUCTIONS
STEP 1
Use Template (F) and a pencil to mark mounting holes in desktop. Drill 3/8” (10mm) deep pilot
holes using a 3/32” (2.5mm) drill bit.
F
9
STEP 2
STEP 3
Using a Phillips screwdriver, install two M5x16mm Screws (W-A) into back mounting holes in
desktop, leaving a 3mm gap for keyhole mounting.
Align keyhole openings on Le Side Bracket (A) and Right Side Bracket (B) with installed Screws
(W-A). Slide assembly back and tighten screws to anchor.
W-A
A
10
STEP 4
Install remaining two front M5x16mm Screws (W-A) and M5 Washers (W-B) using a Phillips
screwdriver.
W-A
W-B
THIS PAGE INTENIONALLY LEFT BLANK
LAST UPDATED: 07/27/2022
REV1.1
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303
/