STAND-SHELF60B

Vivo STAND-SHELF60B User manual

  • Hello! I'm a chat assistant, and I've reviewed the instruction manual for the VIVO Monitor Riser STAND-SHELF60B which is a clamp-on 60-inch shelf with cable management. I can answer your questions about the assembly process, weight capacity, or any other details you might need.
  • What is the weight capacity of this product?
    Are there any choking hazards?
    What if I have missing or defective parts?
Clamp-on 60” Shelf / Compartment Monitor Riser
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/stand-shelf60b
SKU: STAND-SHELF60B
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
2
PACKAGE CONTENTS
TOOLS NEEDED
WARNING!
Phillips
Screwdriver
A (x1)
Right Shelf
Panel
B (x1)
Middle Shelf
Panel
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
44lbs
(20kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
C (x1)
Le Shelf
Panel
S-A (x4)
Cam Lock Screw
S-C (x8)
M4x16mm
Flathead Screw
S-D (x21)
M4x16mm Screw
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
S-E (x6)
M4x25mm Screw
D (x1)
Le End
Panel
E (x1)
Right End
Panel
F (x2)
Center Brace
G (x2)
Clamp
H (x2)
Connecting
Plate
I (x1)
Le Back Panel
J (x1)
Middle Back
Panel
M (x6)
Wooden Dowel
L (x3)
Cable Management
Cover
S-F (x21)
Gasket
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
S-B (x4)
Cam Lock Nut
K (x1)
Right Back Panel
S-G (x14)
M5x12mm Screw
3
ASSEMBLY STEPS
STEP 1
Assemble Connecting Plates (H) to Center Braces (F) using M4x16mm Flathead Screws (S-C) and a
Phillips screwdriver.
Insert Wooden Dowels (M) into Middle Shelf Panel (B). Assemble Right Shelf Panel (A) and Le Shelf
Panel (C) to Middle Shelf Panel (B) using Wooden Dowels (M).
STEP 2
H
F
S-C
C
A
B
M
4
Assemble Connecting Plates (H) to the shelf assembly using M5x12mm Screws (S-G) and a Phillips
screwdriver.
STEP 3
Insert Cam Lock Screws (S-A) into Le End Panel (D) and Right End Panel (E).
STEP 4
D
E
S-A
H
S-G
5
Insert Cam Lock Nuts (S-B) into Right Shelf Panel (A) and Le Shelf Panel (C). Assemble Le End Panel
(D) to Le Shelf Panel (C), and Right End Panel (E) to Right Shelf Panel (A). Rotate Cam Lock Nuts (S-B)
using a Phillips screwdriver to secure the assembly.
STEP 5
S-B
A
C
D
E
6
Assemble Le Back Panel (I), Middle Back Panel (J), and Right back Panel (K) to the shelf assembly
using M4x16mm Screws (S-D), Gaskets (S-F), and a Phillips screwdriver.
STEP 6
Secure Clamps (G) to to the shelf assembly using M4x25mm Screws (S-E).
STEP 7
S-E
G
I
K
J
S-D
S-F
7
Insert Cable Management Covers (L) into shelf assembly.
STEP 8
Mount Clamps (G) to the desktop.
STEP 9
Desktop
L
G
LAST UPDATED: 07/08/2022
REV1.1
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303
/