2. V I V O
  3. DESK-PS02T
DESK-PS02T

V I V O DESK-PS02T User manual

  • Hello! I've reviewed the instruction manual for the VIVO DESK-PS02T Power Strip Tray. This document outlines the assembly process, including connecting the tray to the mounting bracket, drilling pilot holes, and securing it to the desktop. It also provides information about connecting additional trays and safety precautions. I'm ready to answer any questions you have about this product!
  • What is the weight capacity of the tray?
    What tools are needed for assembly?
    Can additional tray sets be added?
Black Under Desk Modular Power Strip Tray
Instruction Manual
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
https://vivo-us.com/products/desk-ps02t
SKU: DESK-PS02T
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
2
If you do not understand these directions, or if you have any doubts about the safety of the installation,
please call a qualified technician. Check carefully to make sure there are no missing or defective parts.
Improper installation may cause damage or serious injury. Do not use this product for any purpose that is
not explicitly specified in this manual and do not exceed weight capacity. We cannot be liable for damage
or injury caused by improper mounting, incorrect assembly, or inappropriate use.
WARNING!
ASSEMBLY STEPS
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
PACKAGE CONTENTS
A (x2)
Tray
B (x1)
Mounting
Bracket
W-A (x2)
ST4.8x16
Screw
STEP 1
Connect Tray (A) to Mounting Bracket (B) using M4x5mm Screws (S-A) and a Phillips screwdriver.
Phillips
Screwdriver
TOOLS NEEDED
S-B (x3)
M4 Washer
S-A (x4)
M4x5mm
Screw
2.2lbs
(1kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
NOTE: Some hardware will not be used.
A
B
S-A
A
3
STEP 2
STEP 3
Adding Additional Tray Sets
Place assembly in desired location and use a pencil to mark pilot holes. Using a 1/8" (3mm) drill bit,
drill two pilot holes 0.6" (16mm) deep.
Attach assembly to desktop using ST4.8x16 Screws (W-A) and a Phillips Screwdriver.
If you purchased additional sets, connect together as shown below using M4x5mm Screws (S-A) and
M4 Washers (S-B). Repeat steps 2-3 to finish installation.
3 Trays
4 Trays
S-A
W-A
S-A
S-B
S-B
LAST UPDATED: 07/28/2022
REV1
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303
/