The equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of

required to correct the interference at their own expense.

To ensure continued compliance, use only shielded interface cables when connecting to computer or peripheral

devices. Any changes or modifications not expressly approved by the party responsible for compliance could void the

user’s authority to operation this equipment.

Installation and serving the camera should be performed only by qualified and experienced technicians to conform to all

local codes and to maintain your warranty.

Operating Notes

Power Supply: This AHD 1080P outdoor bullet camera can operate on DC12V / AC24V.

Operating Conditions

The AHD 1080P outdoor bullet camera is ideal for indoor & outdoor installation. They provide flexible installation on a

ceiling or wall even at an angle.

Please read this manual carefully before you install the bullet camera. Keep this manual for future reference.

 Two torx wrench(one big and one small)

If any parts are missing or damaged, contact the dealer you purchased the camera from.

Please use a soft and dry cloth to remove any fingerprint or dust to clean the housing. For more stubborn stains, use a

cloth dampened with a small quantity of neutral detergent to wipe dry.

Caution: Do not use volatile solvents such as alcohol, benzene or thinners to avoid damaging the surface finish.

1. Mark 3 holes at the suitable position and insert the supplied anchors into the holes.

2. Connect the camera power/video cable and external power/video cable together.

3. Adjust the camera to get a suitable position/angle, then tighten the screws with the screws provided and finish the

installation.