1
Important Safety Information
FCC Compliance Statement
The equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. The limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses, and can radiate frequency
energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to
radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference, in which case users will be
required to correct the interference at their own expense.
FCC Caution:
To ensure continued compliance, use only shielded interface cables when connecting to computer or peripheral
devices. Any changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operation this equipment.
Warning and Operating Notes
Installation and serving the camera should be performed only by qualified and experienced technicians to conform to all
local codes and to maintain your warranty.
WARNING! The use of CSA certified/ UL Listed Class 2 power adapters are required to ensure
compliance.
WARNING! To reduce the risk of fire or electric shock, do not expose the product to rain or
moisture.
Operating Notes
Power Supply: This AHD 1080P outdoor bullet camera can operate on DC12V / AC24V.
Operating Conditions
Avoid viewing very bright objects (example, light fixtures) for extended periods.
Avoid operating or storing the unit in the following locations:
– Extremely humid, dusty, hot, cold environments (where the operating temperature is outside the
recommended range of -4°F to 122°F [-20°C to +50°C ].
– Close to sources of powerful radio or TV transmitters
– Close to fluorescent lamps or objects reflecting light
– Under unstable light sources (may cause flickering)