2. FSR
  3. PWB-FR-450-BLK

FSR PWB-FR-450-BLK Installation guide

  • Hello! I've reviewed the installation instructions for the FSR PWB-450 wall box. This document details how to mount the box, configure its interface plates, route conduits and install the rim. I'm here to answer any questions you might have about the installation process or the device's features described in the document.
  • What needs to be removed before installing the rim?
    How many stud brackets are used to mount the wall box?
    What screws are used to attaching the cover?
FSR 244 Bergen Boulevard, Woodland Park, NJ 07424, Phone: 973.785.4347 - Fax: 973.785.4207
43227 LIT1578
1. BREAK STUD BRACKETS OFF METAL TREE AND
INSTALL ONTO WALL BOX.
WALL BOX
(2) STUD BRACKET
(8) #8-32 x 1/4" LONG
PAN HEAD SCREW
(2) STUD BRACKET
INSTALL WALL BOX ONTO STUDS AND SECURE WITH
HARDWARE (BY OTHERS) AS REQUIRED.
2.
PWB-450 INSTALLATION INSTRUCTIONS
WOOD OR METAL STUD
USE APPROPRIATE HOLES
ON STUD BRACKET TO
SECURE WALL BOX TO
STUDS (METAL OR WOOD)
WITH HARDWARE
(BY OTHERS) AS REQUIRED
COVER HAS TO BE REMOVED FROM RIM BEFORE
RIM CAN BE INSTALLED TO WALL BOX.
5.
COVER
(4) #6-32 x 3/8" LONG
PAN HEAD SCREW
RIM
(4) #8-32 x 1/2" LONG
PAN HEAD SCREW
3. REMOVE BACKBOX COVERS AND ROUTE CONDUITS
TO WALL BOX AS REQUIRED. 4. PER CUSTOMER SPECIFICATIONS CONFIGURE WALL BOX INTERFACE
PLATES AS REQUIRED. INTERFACE PLATES AND DIVIDERS ARE
REMOVABLE IF REQUIRED. REMOVE AC PANEL ASSEMBLY AND
MAKE ELECTRICAL CONNECTIONS AS REQUIRED. REINSTALL BOTH
BACKBOX COVERS SHOWN IN STEP 3 BEFORE MOUNTING DRYWALL.
(2) BACKBOX COVER
(4) #8-32 x 1/4" LONG
FLAT HEAD SCREW
CONDUIT KNOCKOUTS ON
TOP AND BOTTOM OF BOX
AC PANEL ASSEMBLY
(4) INTERFACE PLATE
(2) DIVIDER
(2) DIVIDER WITH
KNOCKOUT
*
*
*
*
THESE ITEMS ARE ACCESSIBLE AFTER
DRYWALL IS INSTALLED.
*
/