Danfoss SpeedUp Wall Heating - Fibre reinforced plasterboard User guide

Danfoss
Brand
Danfoss
Model
SpeedUp Wall Heating - Fibre reinforced plasterboard
Type
User guide

Danfoss SpeedUp Wall Heating - Fibre reinforced plasterboard

is a system for heating your home that is installed in the walls. It consists of a fibre reinforced plasterboard with embedded pipes that carry hot water. The heat from the water is transferred to the room through the plasterboard, providing a comfortable and even heat distribution.

This system is ideal for new construction or renovation projects, and can be used in both residential and commercial buildings. It is a cost-effective and energy-efficient way to heat your home, and can help to reduce your heating bills.

Here are some of the benefits of using Danfoss SpeedUp Wall Heating - Fibre reinforced plasterboard:

Danfoss SpeedUp Wall Heating - Fibre reinforced plasterboard

is a system for heating your home that is installed in the walls. It consists of a fibre reinforced plasterboard with embedded pipes that carry hot water. The heat from the water is transferred to the room through the plasterboard, providing a comfortable and even heat distribution.

This system is ideal for new construction or renovation projects, and can be used in both residential and commercial buildings. It is a cost-effective and energy-efficient way to heat your home, and can help to reduce your heating bills.

Here are some of the benefits of using Danfoss SpeedUp Wall Heating - Fibre reinforced plasterboard:

Fibre Reinforced
Plasterboard
1 Dry walling screws
2 SpeedUp panel, 30 mm
3 Danfoss composite pipe 16 x 2 mm
4 Fibre reinforced plasterboard, 12.5 mm
Technical Data
Wall heating, SpeedUp dry construction
Wall covering 12.5 mm Fibre reinforced plasterboard or similar
Construction thickness 42.5 mm Dimensions without unfinished wall
Thermal resistance (R) 0.86 m²K/W Thermal resistance value for SpeedUp panel
Pipe spacing 125-250 mm EZ = 125; CZ = 250;
Requirements and
specialities
Surface smoothness +/- 3 mm per 1 m. Observe building regulation
requirements concerning thermal insulation. Moisture condensation can occur
and should be taken into consideration when planning wall heating on outer
walls and walls between heated and unheated rooms.
Wall coverings Fermacel/fibre reinforced plasterboard: Thermal conductivity: 0.32 W/m²K;
maximum flow temperature 55°C; form board butt joint as a glued joint. Form
wall attachment with an elastic acrylic joint or joint filler on divider.
Construction Referring to EN 1264.
Construction number 601
Application Sheet
SpeedUp Wall Heating - Fibre Reinforced
Plasterboard
Danfoss Heating Solutions VAETZ202 © Danfoss 03/2011 1
Application Sheet SpeedUp Wall Heating - Fibre Reinforced Plasterboard
Danfoss A/S
Heating Solutions
Haarupvaenget 11
8600 Silkeborg
Denmark
Phone:+45 7488 8000
Fax: +45 7488 8100
Email: [email protected]
www.heating.danfoss.com
Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products
already on order provided that such alterations can be made without subsequential changes being necessary in specifications already agreed. All trademarks in this material are property of the respective
companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.
2 VAETZ202 © Danfoss 03/2011 Danfoss Heating Solutions
  • Page 1 1
  • Page 2 2

Danfoss SpeedUp Wall Heating - Fibre reinforced plasterboard User guide

Danfoss
Brand
Danfoss
Model
SpeedUp Wall Heating - Fibre reinforced plasterboard
Type
User guide

Danfoss SpeedUp Wall Heating - Fibre reinforced plasterboard

is a system for heating your home that is installed in the walls. It consists of a fibre reinforced plasterboard with embedded pipes that carry hot water. The heat from the water is transferred to the room through the plasterboard, providing a comfortable and even heat distribution.

This system is ideal for new construction or renovation projects, and can be used in both residential and commercial buildings. It is a cost-effective and energy-efficient way to heat your home, and can help to reduce your heating bills.

Here are some of the benefits of using Danfoss SpeedUp Wall Heating - Fibre reinforced plasterboard:

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers