Danfoss SpeedUp Eco Wall Heating - Fibre reinforced plasterboard User guide

Danfoss
Brand
Danfoss
Model
SpeedUp Eco Wall Heating - Fibre reinforced plasterboard
Type
User guide

Danfoss SpeedUp Eco Wall Heating - Fibre reinforced plasterboard

is a system for heating your home by circulating warm water through pipes embedded in the wall. It can be used in both new construction and renovation projects. The system is easy to install and can be used with a variety of floor coverings, including tile, carpet, and hardwood.

Benefits of Danfoss SpeedUp Eco Wall Heating

  • Energy efficient: Wall heating is a very energy-efficient way to heat your home. The system operates at a lower temperature than traditional radiant floor heating systems, which means that it uses less energy to achieve the same level of comfort.

Danfoss SpeedUp Eco Wall Heating - Fibre reinforced plasterboard

is a system for heating your home by circulating warm water through pipes embedded in the wall. It can be used in both new construction and renovation projects. The system is easy to install and can be used with a variety of floor coverings, including tile, carpet, and hardwood.

Benefits of Danfoss SpeedUp Eco Wall Heating

  • Energy efficient: Wall heating is a very energy-efficient way to heat your home. The system operates at a lower temperature than traditional radiant floor heating systems, which means that it uses less energy to achieve the same level of comfort.
Fibre Reinforced
Plasterboard
1 Dry walling screws
2 SpeedUp Eco panel, 30 mm
3 Danfoss composite pipe 16 x 2 mm
4 Fibre reinforced plasterboard, 12.5 mm
Technical Data
Wall heating, SpeedUp Eco dry construction
Wall covering 12.5 mm Fibre reinforced plasterboard or similar
Construction thickness 42.5 mm Dimensions without unfinished wall
Thermal resistance (R) 0.75 m²K/W Thermal resistance value for SpeedUp Eco panel
Pipe spacing 125-250 mm EZ = 125; CZ = 250;
Requirements and
specialities
Surface smoothness +/- 3 mm per 1 m. Observe building regulation
requirements concerning thermal insulation. Moisture condensation can occur
and should be taken into consideration when planning wall heating on outer
walls or walls between heated and unheated rooms.
Wall coverings Fermacell/fibre reinforced plasterboard: Thermal conductivity: 0.32 W/m²K;
maximum flow temperature 55°C; form board butt joints as glued joints. Form
wall attachment with an elastic acrylic joint or joint filler on divider.
Construction Referring to EN 1264.
Construction number 611
Application Sheet
SpeedUp Eco Wall Heating - Fibre Reinforced
Plasterboard
Danfoss Heating Solutions VAEUM202 © Danfoss 03/2011 1
Application Sheet SpeedUp Eco Wall Heating - Fibre Reinforced Plasterboard
Danfoss A/S
Heating Solutions
Haarupvaenget 11
8600 Silkeborg
Denmark
Phone:+45 7488 8000
Fax: +45 7488 8100
Email: [email protected]
www.heating.danfoss.com
Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products
already on order provided that such alterations can be made without subsequential changes being necessary in specifications already agreed. All trademarks in this material are property of the respective
companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.
2 VAEUM202 © Danfoss 03/2011 Danfoss Heating Solutions
  • Page 1 1
  • Page 2 2

Danfoss SpeedUp Eco Wall Heating - Fibre reinforced plasterboard User guide

Danfoss
Brand
Danfoss
Model
SpeedUp Eco Wall Heating - Fibre reinforced plasterboard
Type
User guide

Danfoss SpeedUp Eco Wall Heating - Fibre reinforced plasterboard

is a system for heating your home by circulating warm water through pipes embedded in the wall. It can be used in both new construction and renovation projects. The system is easy to install and can be used with a variety of floor coverings, including tile, carpet, and hardwood.

Benefits of Danfoss SpeedUp Eco Wall Heating

  • Energy efficient: Wall heating is a very energy-efficient way to heat your home. The system operates at a lower temperature than traditional radiant floor heating systems, which means that it uses less energy to achieve the same level of comfort.
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers