Spin-Digger SDMKWT User guide

Use and Care Manual Spindigger Screw-Post

The Spindigger mailbox kit is the easy and convenient way of turning your Spindigger screw-

post into a beautiful mailbox effortlessly.

1. Place the aluminum support arm over the Spindigger screw post and move to desired

height.

2. Using the provided hex key tighten all 4 screws on the support arm to tighten to post

3. Using the provided 4 bolts secure the plastic mounting plate to the top of the support

arm and tighten securely.

4. Place ball topper on top of post and tighten the screw on the back with the hex key.

(mailbox and post not included)

Spindigger products are made of all high-grade aluminum so they will never rust or corrode.

Upkeep is easy as keeping the product clean.

If there are any questions or comments about product please call us at 1(800) 977-2626 or visit

us at https://spindigger.com/