Atlas Metal Industries BLH-3-OT Datasheet

Brand
Atlas Metal Industries
Model
BLH-3-OT
Type
Datasheet

This manual is also suitable for

a subsidiary of Mercury Aircraft
1135 NW 159 Dr., Miami, Florida 33169
Tel: (305) 625-2451 or (800) 762-7565 • Fax: (305) 623-0475
MO DU LA R SE RVING SYSTEMS
BL-3
MOBILE HOT
SERVING UNIT
Open Base, Electrically Heated,
Individual Controls with 1”
Offset Top for (18 x 26) Bun Pans
Optional Drain and Manifold
FEATURES
Attractive plastic laminate panels
Individually controlled thermostats
High wattage food wells, use wet or dry
Economical cost
Cam-Lock system
DESCRIPTION
This attractive, functional unit keeps hot foods hot - at their peak of
serving perfection. Your customers will see, taste and come back for
the difference.
A wide range of attractive plastic laminate colors is available, or ure-
thane painted panels to blend with any decor.
Quality construction provides years of reliable service. Complete
reliability - use as an individual unit or joined in a continuous serv-
ing line with our exclusive “Cam-Lock” system.
BLH-2-OT
BLH-3-OT
BLH-4-OT
BLH-5-OT
BLH-6-OT
MODEL #BLH-5-OT
Shown with accessories
High Shelf, Undershelf, Drain & Manifold with
Rear Extension, Apron Mounted Controls
Quantity Item No.
a subsidiary of Mercury Aircraft
1135 NW 159 Dr., Miami, Florida 33169
Tel: (305) 625-2451 or (800) 762-7565 • Fax: (305) 623-0475
BL-4
TOP: Constructed of 16 gauge, type 304 stainless
steel, with 1” offset top, die-formed, welded,
ground and polished to a uniform finish with
rolled front edge.
BODY: Frame construction shall be of hi-tensile
square aluminum tubing, 1-1/4”, 1’ and 3” extrud-
ed, vertical radius corners. Frame sections are all
welded construction, ground and polished to a
uniform finish. Body is complete with front panel,
end panels and 8-5/8” rear apron of plastic lami-
nate on .050 aluminum. Owner to specify laminate
finish. Cam-lock locking system included with
each unit to align and retain cart positioning,
when two or more units are joined.
HOT SERVING UNIT: The cart is complete and
includes a hot serving unit installed in the top.
Constructed of 18 gauge, type 304 stainless steel.
Individual 12” x 20” hot food wells are provided,
fabricated of 18 gauge stainless steel, one piece
construction, all welded, ground and polished to a
uniform finish. 1” offset top will accommodate 18
x 26 bun pans. All corners are coved with a mini-
mum 1/4” radius. Each well is provided with an
850 watt heating element. The wells can be used
with or without water, however, the use of water
for a more efficient operation is recommended
ELECTRICAL: The unit is provided with a
prewired single thermostat control for each well,
with a pilot light. A 6’ long, 3-wire cord and plug
is provided, extending from the control box locat-
ed under the unit, on operator’s left. Available for
single phase power only.
CASTERS: N.S.F approved, 5” diameter, non-
marking rubber tired, swivel plate caster with
grease fittings. Both casters on the operator’s
side have toe activated brakes.
Specifications subject to change without notice.
ACCESSORIES:
Tray slide, 12” wide, stainless steel, solid
ribbed, fold-down
Work shelf, 8” wide, stainless steel, flat, fold-
down.
High shelf, stainless steel, with glass sneeze
guard
SAR Plexiglass End Sneeze Guards for High
Shelf (set of 2)
Canopy, stainless steel, with SAR Plexiglass
sneeze guard on customer’s side only
Food Warmer under High Shelf or Canopy*
Fluorescent Light under High Shelf or
Canopy*
Drain Line Manifold to single drain valve
Drain Valve for each well to single drain line
Convenience Outlet (specify wattage, volt-
age & location)*
Stainless Steel Legs with adjustable feet, in
lieu of casters
Urethane painted panels (see color chart)
Undershelf (removable) bottom or middle
shelf, stainless steel
RPS - Rear Sliding Doors, stainless steel
RPS - Door Locks
RPS - Plastic Laminate Exterior
* Change in electrical required, contact factory.
SPECIFICATIONS:
MOBILE HOT SERVING UNIT
Open Base
MODEL “A”
FOOD
WELLS
ELECTRICAL
CHARACTERISTICS
NEMA
CONFIGURATION
BLH-2-OT 36-1/4” 2 1.7 KW - 8.2 amps. 208 V 6-15P
BLH-3-OT 50” 3 2.55 KW - 12.3 amps. 208 V 6-20P
BLH-4-OT 63-3/4” 4 3.4 KW - 16.3 amps. 208 V 6-30P
BLH-5-OT 77-1/2” 5 4.25 KW - 20.4 amps. 208 V 6-30P
BLH-6-OT 91-1/4” 6 5.1 KW - 24.5 amps. 208 V L6-50P
N
OTE: Electrical characteristics subject to change when electrical accessories are added.
10/08-SC
30 1/2”
A
Plan View
3 7/8”
3 7/8”
56 x 26 offset top
for (3) 18” x 26” sheet pans
(sheet pans supplied by others)
35”
3”
Rear Elevation
End View
1” offset top
  • Page 1 1
  • Page 2 2

Atlas Metal Industries BLH-3-OT Datasheet

Brand
Atlas Metal Industries
Model
BLH-3-OT
Type
Datasheet
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents