Atlas Metal Industries TC-2-S Datasheet

Category
Multimedia carts & stands
Type
Datasheet

Atlas Metal Industries TC-2-S mobile tray and silver cart is designed to enhance serving efficiency and storage in foodservice operations. Constructed from durable stainless steel, it features a tray storage area, high-volume flatware service, and four vertical corner bumpers for protection. It can be used as an individual unit or integrated into a continuous serving line for maximum flexibility.

Atlas Metal Industries TC-2-S mobile tray and silver cart is designed to enhance serving efficiency and storage in foodservice operations. Constructed from durable stainless steel, it features a tray storage area, high-volume flatware service, and four vertical corner bumpers for protection. It can be used as an individual unit or integrated into a continuous serving line for maximum flexibility.

a subsidiary of Mercury Aircraft
1135 NW 159 Dr., Miami, Florida 33169
Tel: (305) 625-2451 or (800) 762-7565 Fax: (305) 623-0475
M O D U L A R S E RV I N G S Y S T E M S
BL-17-A
MOBILE TRAY
& SILVER CART
FEATURES
Rugged stainless steel construction
Provided with four (4 ea.) vertical corner bumpers
Large capacity tray storage area
High volume flatware service at a convenient height
DESCRIPTION
This mobile tray and silver cart completes your
serving system, enabling easy access and stor-
age of trays and flatware at the beginning of the
line. The cart can be easily loaded in the clean
dish area and rolled to the serving line save han-
dling, save money.
Fashion-right Atlas units make eating more
pleasurable. The luster of stainless steel creates a
feeling of warmth and cleanliness while the addi-
tion of laminate panels will complement any
existing decor or future fashion trends.
Quality construction, rugged stainless steel for
years of cost efficient, trouble free service.
Complete flexibility - use as an individual unit or
together with other serving equipment to form a
continuous serving line.
TC-2-S
TC-2-S
Shown with Accessories
Quantity Item No.
a subsidiary of Mercury Aircraft
1135 NW 159 Dr., Miami, Florida 33169
Tel: (305) 625-2451 or (800) 762-7565 Fax: (305) 623-0475
BL-18-A
TOP: Constructed of 18 gauge, type 304
stainless steel, with all corners heliarc
welded, ground and polished to a uniform
finish. Top to be provided with ten (10 ea.)
4” diameter die stamped openings to
receive nylon silverware cylinders (cylin-
ders by others.) Top is integrally formed into
side panels for the cart.
TRAY SHELF: Constructed of 18 gauge
stainless steel, full-length, and turned up at
the rear of the unit. Bottom is reinforced
with 14 gauge steel plate for proper caster
mounting and is provided with four (4 ea.)
non-marking vertical corner bumpers.
CASTERS: N.S.F. approved, 5” diameter,
non-marking, rubber tired swivel plate
casters with grease fittings. Both casters
on the operator’s side have foot operated
brakes.
Specifications subject to change without
notice.
ACCESSORIES:
Nylon silverware cylinders, ten (10 ea.)
required
Stainless steel napkin shelf
SPECIFICATIONS:
MOBILE TRAY & SILVER CART
TC-2-S
10/08-SC
33”
22 1/2”
42”
14”
Open
  • Page 1 1
  • Page 2 2

Atlas Metal Industries TC-2-S Datasheet

Category
Multimedia carts & stands
Type
Datasheet

Atlas Metal Industries TC-2-S mobile tray and silver cart is designed to enhance serving efficiency and storage in foodservice operations. Constructed from durable stainless steel, it features a tray storage area, high-volume flatware service, and four vertical corner bumpers for protection. It can be used as an individual unit or integrated into a continuous serving line for maximum flexibility.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI