a subsidiary of Mercury Aircraft
1135 NW 159 Dr., Miami, Florida 33169
Tel: (305) 625-2451 or (800) 762-7565 • Fax: (305) 623-0475
BL-34
TOP: Constructed of 16 gauge, type 304 stainless
steel, die-formed, welded, ground and p01shed
to a uniform finishwith rolled front and rear edge.
BODY: Frame construction shall be of hi-tensile
square aluminum tubing, 1-1/4”, 1” and 3”
extruded, vertical radius corners. Frame sec-
tions are all welded construction, ground and
polished to a uniform finish. Body is complete
with front panel, end panels, a stainless steel
sliding rear door covered in plastic laminate, and
8-5/8” rear apron of plastic laminate on .050 alu-
minum. Owner to specify laminate finish. Cam-
lock locking system included with each unit to
align and retain cart positioning, when two or
more units are joined.
CASTERS: N.S.F approved, 5” diameter, non-
marking rubber tired, swivel plate caster with
grease fittings. Both casters on the operator’s
side have toe activated brakes.
Specifications subject to change without notice.
ACCESSORIES:
Tray Slide, 12” wide, stainless steel, solid
ribbed, fold-down (each side)
Urethane painted panels (see color chart)
Canopy, stainless steel, with SAP plexiglass
sneeze guard on both sides and flourescent
lights (115V)*
* Change in electrical required, contact factory.
SPECIFICATIONS:
BLU-2-BU
BLU-3-BU
BLU-4-BU
BLU-5-BU
BLU-6-BU
MOBILE UTILITY SERVING UNIT
Buffet Style
MODEL “A” WIDTH HEIGHT
BLU-2-BU 36-1/4” 30-3/4” 35”
BLU-3-BU 50” 30-3/4” 35”
BLU-4-BU 63-3/4” 30-3/4” 35”
BLU-5-BU 77-1/2” 30-3/4” 35”
BLU-6-BU 91-1/4” 30-3/4” 35”
10/08-SC
30 3/4”
Plan View
A
35”
3”
Rear Elevation
End View