East Bethel, MN USA 763-753-7374
Continued
1
Parts Identifi cation
Remove contents from Box.
Stack matching pieces in piles. Using the parts list,
locate and count the individual pieces and verify that
you have received the correct number of pieces.
If any pieces are missing or replacement parts are
required, contact Gronomics at 1-855-299-6727.
NOTE: It is recommended to place a protective layer
between the ground and the pieces during assembly.
This will help prevent damage to the pieces.
3
4
Parts List
ITEM QTY. PART # DESCRIPTION
1 2 SP4021 Screen Panel, 40” x 21-1/2”
2 1 BP4021 Blank Panel Screenless (w/Cleat), 40” x 21-1/2”
3 2
4 2
RER4521 Extension Roof, 45” x 21”
CCP2175 Extension Post, 21-3/4 x 3-3/4”
Chicken Coop Run Kit
45"L x 45"W x 23”H Assembly Instruction
CCPCR 45-45
Packaged & Inspected by: Date:
1
2
NOTE: Chicken coop run kits can be added to the left, right or back side of the chicken coop. Multiple run kits can be installed to the chicken coop or
installed to existing run kits to increase coop size.
East Bethel, MN USA 763-753-7374
3
Chicken Run Kit Assembly Continued
Install the two screen panels (Item 1) (with screw heads facing in) into
the slots on the chicken coop posts and slide down.
Place the screen side between the screen panels (Item 1) (with screw
heads facing in).
Align the screen tabs with the slots on the 21-3/4” posts (Item 4) and
slide the post down onto the screen panels.
1
4
4
Screen Panel
From Chicken
Coop
Install the two extension roof panels (Item 3) on top of the screen
panels.
Re-install the chicken coop folding lid.
4
Chicken Run Kit Assembly Continued
Folding Lid
3
2
Chicken Run Kit Assembly
NOTE: The run kit blank panel (Item 2) will be installed in place of a pet
cottage screen panel on the desired side of chicken coop.
Align and install the blank panel (Item 2) between the posts with the
cleat located at the top and facing you. Slide the blank panel down to
the ground.
Blank Panel Cleat
Located At Top
2
/
