Gronomics RH 24-45 Operating instructions

Brand
Gronomics
Model
RH 24-45
Type
Operating instructions
WWW.gronomics.com East Bethel, MN USA
763-753-7374
Rabbit Hutch (24” x 45” x 32”H)
Assembly Instruction
Continued
Parts List
Product Care and Maintenance
ITEM QTY. PART # DESCRIPTION
Western Red Cedar will turn a
weathered grey if left unfi ished.
Although no finish is required for
cedar when used outdoors, a
natural oil finish applied regularly
will help maintain the beauty and
minimize cracking and
drying. It is recommended to use
Gronomics Garden Bed Oil
(Item# GBO-1Q), a non-toxic, food
safe finish that is very easy to
apply.
Apply oil when air and wind
temperatures are between 50-90
degrees. Avoid applying in direct
sunlight.
1 1 TL 2746 Top Lid, 27” x 46”
2 8 R2100 Side Rail, 5/8” x 5-1/2” x 21”
3 4 3200H Corner Post, 4” x 4” x 32” w/21-3/4” dovetail
depth
4 2 SPC4021 Screen Panel w/cleat 40” x 21-1/2”
5 1 BSP4018 Bottom Screen Panel w/4 notched corners
20-3/8” x 40-1/8”
6 4 NBP178 Nesting Box Posts, 1-7/8” x 1-7/8” x 12”
7 6 NBSB538 Nesting Box Side Boards, 5-3/8” x 11-1/2”
8 2 NBSBH5 Nesting Box Side Boards w/hole,
5-3/8” x 11-1/2”
9 1 NBR1438 Nesting Box Roof w/notched corners,
14-3/8” x 14-3/8”
Stack matching pieces in piles. Using the parts list,
locate and count the individual pieces and verify that
you have received the correct number of pieces.
If any pieces are missing or replacement parts are
required, contact Gronomics at 1-855-299-6727.
NOTE: It is recommended to place a protective layer
between the ground and the pieces during assembly.
This will help prevent damage to the pieces.
Parts Identification
RH 24-45
1
1
2
4
3
5
6
9
8
7
Packaged & Inspected by: Date:
WWW.gronomics.com East Bethel, MN USA 763-753-7374
Continued
NOTE: Assemble the rabbit hutch on a level surface
and keep posts and parts square when assembling.
Stand two 4” x 4” x 32” corner posts (Item 3) upright
with slots facing you and with slots facing each other.
Install a 40” x 21-1/2” screen panel w/cleat (Item 4)
(cleat facing you) into the slots and slide down.
Corner Post / Screen Side Assembly
2
3
Cleat
4
3
Repeat step 2 with the remaining 4” x 4” x 32”corner
posts (Item 3) and 40” x 21-1/2” screen panel w/cleat
(Item 4).
Install a 5/8” x 5-1/2” x 21” side rail (Item 2) on each
side into the slots and slide down.
Side Rail Assembly
3
3
4
2
2
Install remaining 5/8” x 5-1/2” x 21” side rails (Item 2).
Side Rail Assembly Continued
4
2
2
Install the 20-3/8” x 40-1/8” bottom screen panel (Item
5), with the screw heads facing down by resting it on
the cleats of the 40” x 21-1/2” screen panels with cleats
(Item 4).
Bottom Screen Panel Assembly
5
5
4
4
WWW.gronomics.com East Bethel, MN USA 763-753-7374
Continued
1
Install the 27” x 46” top lid, (Item 1) on top of the hutch.
The lid will rest on top of the hutch when raised.
Top Lid Assembly
6
1
NOTE: Assemble the nesting box on a level surface
and keep posts and parts square when assembling.
Stand the four 1-7/8” x 1-7/8” x 11-1/2” nesting box
posts (Item 6) upright with the slots facing each other.
Install a 5-3/8” x 11-1/2” side board (Item 7) on three
sides. Install a 5-3/8” x 11-1/2” side board with w/hole
(Item 8). Hole facing up.
Nesting Box Assembly
7
6
7
8
Install a 5-3/8” x 11-1/2” side board (Item 7) on three
sides.
Install a 5-3/8” x 11-1/2” side board with w/hole (Item
8). Hole facing down.
Nesting Box Assembly Continued
8
7
8
WWW.gronomics.com East Bethel, MN USA 763-753-7374
Install the 14-3/8 x 14-3/8 nesting box roof (Item 9) on
top of the side rail assembly.
Nesting Box Roof Assembly
9
9
Place the nesting box in the rabbit hutch.
Nesting Box Placement
10
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Gronomics RH 24-45 Operating instructions

Brand
Gronomics
Model
RH 24-45
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents