Large Coop Run Extension Kit

SNAP LOCK Large Coop Run Extension Kit User manual

Hello! I've reviewed the Instruction Manual for the Large Model Snap Lock Chicken Coop Run Extension. This document provides a step-by-step guide on assembling the extension, including how to connect panels, and attach chicken wire. I'm ready to answer your questions about extending your chicken coop run using this product.
What components are included in the kit?

Is chicken wire included with the extension?

What is the first step in assembling the extension?

How do you connect the side panels?

Where does removed door go after assembly?

Instruction Manual

for Snap Lock Large Chicken Coop Run

Large Coop Run Extension

This kit for the Large Model SNAP LOCK CHICKEN COOP RUN includes the following:

• one envelope containing instructions, the warranty

• It also includes all the parts listed on this page

PARTS LIST FOR THE LARGE SNAP LOCK CHICKEN COOP RUN

Cross Bar (2)

Side Panel (4)

Link Bar (4)

LARGE COOP RUN EXTENSION Assembly

Step 1: First remove the LARGE CHICKEN COOP RUN end assembly. First detach any wire twists or

zip ties used to connect the chicken wire along the end section.

Fig. 1a

LARGE COOP RUN EXTENSION Assembly

Step 2: Then remove first the top bar, followed by the

door and door supports, followed by the bottom bar.

Set these components aside as they will be used later.

To remove the top and bottom bar, first place a screw

Fig. 1b

Fig. 2b

LARGE COOP RUN EXTENSION Assembly

Step 3: Now assemble the extension. Connect the Side Panels to-

gether by using the Link Bar as shown. First align the side panels so

that the slots on one side align. Then insert the Link Bar into the slots

leaving the top two slots open. Press down firmly until the it locks into

place.

Fig. 3a

Fig. 3b

Fig. 3c

LARGE COOP RUN EXTENSION Assembly

Step 4: Repeat this process with the support bar on the reverse side of the side panels to assemble the second wall

of the CHICKEN COOP RUN EXTENSION

Fig. 4a

Fig. 4b

Fig. 4c

LARGE COOP RUN EXTENSION Assembly

Step 5: Place both side panel assemblies so that the slots align with the open slots on the end of

the LARGE CHICKEN COOP assembly. Lock them into place as shown by inserting two Link Bars

into the slots, leaving the top two slots on the LARGE CHICKEN COOP assembly open. Press the

Link Bars down until they lock into place

Fig. 5a

Fig. 5b

Step 6: Install the Bottom Bar and both Door Frame components from the original LARGE CHICKEN

RUN assembly onto the end of the LARGE CHICKEN RUN EXTENSION as shown. Press the side

Panels outward to allow the tabs of the Bottom Bar to fit. Press the Bottom Bar down firmly until it locks

into place.

LARGE COOP RUN EXTENSION Assembly

Fig. 6a

Fig. 6b

Step 7: Now attach the two included Top Bars and the Top Bar removed from the original CHICKEN

COOP RUN assembly into the top two slots of the side panels. Press the Side Panels outward to

insert the tabs, then press the Top Bars downward until they lock into place.

Fig. 7a

LARGE COOP RUN EXTENSION Assembly

Step 8: Place the End Door from the original LARGE COOP RUN assembly back into place, now at

the end of the LARGE COOP RUN EXTENSION assembly

Fig. 8a

LARGE COOP RUN EXTENSION Assembly

LARGE COOP RUN EXTENSION Assembly

Step 9: The Snaplock Large Chicken Coop Run Extension is compatible with all standard chicken wire.

Chicken wire is not included with the Snaplock Large Chicken Coop Run Extension.

Cut the chicken wire to the following dimensions and quantities

42” x 17” quantity 4

45” x 21” quantity 2

LARGE COOP RUN EXTENSION Assembly

Step 10: Use any zip tie or wire twist to attach the chicken wire segments to the large coop run

extension as shown

42” x 17

34” x 18”

Reuse from LARGE

CHICKEN COOP

RUN assembly

45” x 21”

Fig. 10a

LARGE COOP RUN EXTENSION Assembly

Step 10 continued: Use any zip tie or wire twist to attach the chicken wire segments to the large

coop run and stand as shown

Fig. 10b

42” x 17

34” x 18”

Reuse from LARGE

CHICKEN COOP

RUN assembly

45” x 21”

LARGE COOP RUN EXTENSION Assembly

Step 11: You have now completely assembled the LARGE COOP RUN EXTENSION to the LARGE

COOP RUN.

Fig. 11a

/

Related papers

Other documents