2. DIODE LED
  3. 12mm Tape Light Terminal Block Connector

DIODE LED 12mm Tape Light Terminal Block Connector Installation guide

  • Hello! I've reviewed the installation guide for the Mini Tape Light Terminal Block Connector. This document provides step-by-step instructions for properly installing the connector, including details about compatible wire gauges and maximum amperage. I'm ready to answer any questions you have about the installation process or device specifications.
  • What is the maximum current supported at 12V?
    What is the maximum current supported at 24V?
    What type of wire is recommended?
    What is the recommended torque for the terminal?
MINI INSTALLATION GUIDE
12MM TAPE LIGHT TERMINAL BLOCK CONNECTOR
For more detailed installation instructions visit www.diodeled.com.
Toll Free: 877.817.6028 | Fax: 415.592.1596 | www.DiodeLED.com | inf[email protected]
© 2019 Elemental LED Inc. All rights reserved. Specicaons are subject to change without noce.
-
+
24V
-
+
-
+
24V
-
+
--
+
+
-
®
-
+
24V
-
+
--
+
INSERT TAPE LIGHT FASTEN TERMINAL
IG072919-2.0
TAPE LIGHT TERMINAL BLOCK CONNECTOR
MINI INSTALLATION GUIDE
Max. Amp 12V - 5A / 24V - 4A Wire Gauge 14 AWG - 20 AWG*
1
3
2
1
3
2
**
**Torque to 2 in-lb maximum.
CUT TAPE LIGHT AND
LOOSEN TERMINAL
*Stranded, not tinned wire only. If utilizing 14AWG solid or tinned wire, replace
stock screws with included alternates.
-
+
-
+
/