iBaby M6S Installation guide

M6S
Brand
iBaby
Model
M6S
Type
Installation guide

This manual is also suitable for

Quick Start Guide
Includes Installing Your New Monitor
1 Baby Monitor
1 Camera Base
1 Quick Start Guide
1 Power Adapter
What you need to get started:
Getting Started
iOS
Android
Your Wi-Fi
Router/Modem
(not included)
Power Adapter
Monitor
Phone’s Original
USB Cable
(not included)
Your Smart Device
(not included)
Step 1
Step 2
Step 4 Step 6
Step 5
Step 3
Verify that your smart device is connected to a
Wi-Fi network. Your router must provide Wi-Fi
connection for Internet access.
From App Store or Google Play, download the
iBaby Care
*
app onto your supported device and
launch the app.
Connect the power adapter to the back of your
camera.
Unplug the USB cable from your phone and
monitor when prompted, place the monitor on
the base & enjoy using your monitor!
Connect the original USB cable that comes with
your phone to the monitor and your phone.
Click allow when you see any of the following
prompted messages.
* Note: for iPad users, change to “iPhone Only” to download the app.
USB
USB
1
3
2
4
5
1- Reset your monitor by holding the reset button for 15
seconds
(located above USB slot on the monitor).
2- Follow steps 1 through 6 to successfully change your
monitor’s Wi-Fi settings.
Changing Your Router?
Guide de démarrage rapide
Guida rapida di avvio
Wi-FiBack
Carrier 75%8:08 AM
Wi-Fi
iBaby Care would like to
communicate with the
iBaby Labs, Inc iBaby M6
Share Wi-Fi Settings?
Do you want to share your Wi-Fi
settings so this accessory can
connect to the Wi-Fi network?
AllowIgnore
AllowIgnore
iBaby Care
  • Page 1 1

iBaby M6S Installation guide

M6S
Brand
iBaby
Model
M6S
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents