Husky Liners 9948 User manual

Brand: Husky Liners

Model: 9948

Type: User manual

Husky Liners 9948 are custom molded floor liners designed to fit your vehicle's floorboard perfectly. Made from lightweight yet durable engineering resin, they replace your factory floor mats and protect your carpeting from dirt, spills, and wear. Easy to clean with soap and water or household cleaners, they attach to the factory floor twist locks for a secure fit.

Husky Liners 9948 are custom molded floor liners designed to fit your vehicle's floorboard perfectly. Made from lightweight yet durable engineering resin, they replace your factory floor mats and protect your carpeting from dirt, spills, and wear. Easy to clean with soap and water or household cleaners, they attach to the factory floor twist locks for a secure fit.

WEATHERBEATER® PT #9948

FLOOR LINERS

View the Husky Liner Lifetime Warranty at www.huskyliners.com/lifetime-warranty 9948_Installation_Instruction.docx

6_8_2022

CARE AND USE INSTRUCTIONS

Thank you for selecting an WeatherBeater™ Floor Liners from Husky Liners Inc.

Your new liners are custom molded to fit your specific vehicle’s floor board. The liners

are made to take the place of your factory floor mats. For correct fit, it is necessary to

remove the factory floor mats before installing your new floor liners. However, do not

remove the factory-installed carpeting.

Your liners are made from an engineering resin that is lightweight and extremely

tough and durable. The easiest way to clean your liner is with a damp cloth or sponge

and soap and water. Windex®, 409® and ArmorAll® type cleaners work as well.

INSTALLATION INSTRUCTIONS

FOR YOUR FRONT FLOOR LINERS

TO EASE INSTALLATION OF YOUR NEW FRONT LINERS, MOVE BOTH FRONT ROW SEATS TO THEIR

MOST REARWARD POSITION. WITH THIS DONE, INSTALL THE LINERS AS SHOWN ABOVE. THE

DRIVER AND PASSENGER SIDE LINER WILL ATTACH TO THE FACTORY FLOOR TWIST LOCKS. ONCE

YOU HAVE INSTALLED YOUR LINERS, REPOSITION THE SEATS AS DESIRED.

LEFT OR DRIVER’S

SIDE

RIGHT OR PASSENGER’S

SIDE

WEATHERBEATER® PT #9948

FLOOR LINERS

View the Husky Liner Lifetime Warranty at www.huskyliners.com/lifetime-warranty 9948_Installation_Instruction.docx

6_8_2022

Thank you for selecting an WeatherBeater™ Floor Liners from Husky Liners Inc.

Your new liners are custom molded to fit your specific vehicle’s floor board. The liners

are made to take the place of your factory floor mats. For correct fit, it is necessary to

remove the factory floor mats before installing your new floor liners. However, do not

remove the factory-installed carpeting.

Your liners are made from an engineering resin that is lightweight and extremely

tough and durable. The easiest way to clean your liner is with a damp cloth or sponge

and soap and water. Windex®, 409® and ArmorAll® type cleaners work as well.

INSTALLATION INSTRUCTIONS FOR YOUR

SECOND SEAT FLOOR LINERS

TO EASE INSTALLATION OF YOUR NEW SECOND SEAT LINER, MOVE BOTH FRONT ROW SEATS TO

THEIR MOST FORWARD POSITION. WITH THIS DONE, INSTALL THE LINER AS SHOWN ABOVE.

ONCE YOU HAVE INSTALLED YOUR LINER, REPOSITION THE SEATS AS DESIRED.

1
2

Husky Liners 9948 User manual

Brand: Husky Liners

Model: 9948

Type: User manual

Husky Liners 9948 are custom molded floor liners designed to fit your vehicle's floorboard perfectly. Made from lightweight yet durable engineering resin, they replace your factory floor mats and protect your carpeting from dirt, spills, and wear. Easy to clean with soap and water or household cleaners, they attach to the factory floor twist locks for a secure fit.

Download PDF

Related papers

Other documents