Husky Liners 99421 Operating instructions

99421
Brand
Husky Liners
Model
99421
Type
Operating instructions

Husky Liners 99421 are custom-molded floor liners that provide superior protection for your vehicle's interior. Made from a durable engineering resin, these liners are lightweight yet extremely tough and can withstand everyday wear and tear. The liners are easy to clean using a damp cloth or sponge, and they are compatible with most common cleaners, such as 409® and Glass Plus®. Installation is simple: remove the factory floor mats, position the liners in place, and secure them to the factory floor mat retention hooks.

Husky Liners 99421 are custom-molded floor liners that provide superior protection for your vehicle's interior. Made from a durable engineering resin, these liners are lightweight yet extremely tough and can withstand everyday wear and tear. The liners are easy to clean using a damp cloth or sponge, and they are compatible with most common cleaners, such as 409® and Glass Plus®. Installation is simple: remove the factory floor mats, position the liners in place, and secure them to the factory floor mat retention hooks.

WEATHERBEATER™ PT #99421
FLOOR LINERS
View the Husky Liner Lifetime Warranty at www.huskyliners.com/lifetime-warranty 9942 WB Combo_Installation Instructions.doc
6_15_2023
CARE AND USE INSTRUCTIONS
Thank you for selecting a WeatherBeater® Floor Liner from Husky Liners. Your new front floor liners are
custom molded to fit your specific vehicle. The liners are made to take the place of your factory floor mats. For
correct fit, it is necessary to remove the factory floor mats before installing your new floor liners. However,
do not remove the factory-installed carpeting. Your liners are made from an engineering resin that is
lightweight and extremely tough and durable. The easiest way to clean your liners is with a damp cloth or
sponge. If using a cleaner, 409® or Glass Plus® work well. Use of Armor All®, Son-of-a-Gun® or similar
items is discouraged as these products make the liners slick.
INSTALLATION INSTRUCTIONS FOR YOUR
FRONT FLOOR LINERS
TO EASE INSTALLATION OF YOUR FRONT LINERS, MOVE BOTH FRONT SEATS TO THEIR MOST
REARWARD POSITION. NEXT, REMOVE ANY EXISTING FLOOR MATS AND INSTALL THE LINERS,
POSITIONED AS SHOWN ABOVE. TAKE CARE THE LINERS ARE SECURED TO THE FACTORY FLOOR
MAT RETENTION HOOKS LOCATED IN THE VEHICLE FLOOR. ONCE THE LINERS ARE INSTALLED,
MOVE THE FRONT SEATS TO THEIR DESIRED LOCATIONS.
LEFT OR DRIVER’S SIDE
RIGHT OR PASSENGER’S SIDE
WEATHERBEATER™ PT #99421
FLOOR LINERS
View the Husky Liner Lifetime Warranty at www.huskyliners.com/lifetime-warranty 9942 WB Combo_Installation Instructions.doc
6_15_2023
CARE AND USE INSTRUCTIONS
Thank you for selecting a WeatherBeater™ Floor Liner from Husky Liners. Your new second seat liner is
custom molded to fit your specific vehicle. The liner is made to take the place of your factory floor mats. For
correct fit, it is necessary to remove the factory floor mats before installing your new floor liners. However,
do not remove the factory-installed carpeting.
Your liner is made from an engineering resin that is lightweight and extremely tough and durable. The
easiest way to clean your liner is with a damp cloth or sponge. If using a cleaner, 409® or Glass Plus® work
well. Use of Armor All®, Son-of-a-Gun® or similar items is discouraged as these products make the liner slick.
INSTALLATION INSTRUCTIONS FOR YOUR SECOND SEAT
FLOOR LINER
TO INSTALL YOUR SECOND SEAT LINER, FIRST MOVE YOUR FRONT ROW SEATS COMPLETELY
FORWARD. THEN, INSTALL YOUR NEW LINER, POSITIONING IT IN THE VEHICLE AS SHOWN ABOVE.
LASTLY, REPOSITION YOUR FRONT ROW SEATS AS DESIRED.
  • Page 1 1
  • Page 2 2

Husky Liners 99421 Operating instructions

99421
Brand
Husky Liners
Model
99421
Type
Operating instructions

Husky Liners 99421 are custom-molded floor liners that provide superior protection for your vehicle's interior. Made from a durable engineering resin, these liners are lightweight yet extremely tough and can withstand everyday wear and tear. The liners are easy to clean using a damp cloth or sponge, and they are compatible with most common cleaners, such as 409® and Glass Plus®. Installation is simple: remove the factory floor mats, position the liners in place, and secure them to the factory floor mat retention hooks.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents