Husky 54141 User manual

Hello! I've reviewed the instructions for your Husky Liners X-act Contour 54141 Floor Liner. This document provides details on how to install and maintain your new floor liner, highlighting its durable material and custom fit. I'm ready to answer any questions you have about using your new liner.
Should I remove the factory-installed carpeting before installing the floor liner?

What is the best way to clean the floor liner?

What should I avoid when cleaning the floor liner?

X-ACT CONTOUR® PT #54141

FLOOR LINERS

View the Husky Liner Lifetime Warranty at www.huskyliners.com/lifetime-warranty 5414 X-act Contour 2nd Seat Floor Liner.docx

7_21_2023

CARE AND USE INSTRUCTIONS

Thank you for selecting an X-act Contour® Floor Liner from Husky Liners. Your new second seat liner is custom

molded to fit your specific vehicle. The liner is made to take the place of your factory floor mat(s). For correct

fit, it is necessary to remove the factory floor mats before installing your new floor liner. However, do not

remove the factory-installed carpeting.

Your liner is made from an engineering resin that is lightweight and extremely tough and durable. The easiest

way to clean your liner is with a damp cloth or sponge. If using a cleaner, 409® or Glass Plus® work well. Use of

Armor All®, Son-of-a-Gun® or similar items is discouraged as these products make the liner slick.

INSTALLATION INSTRUCTIONS FOR YOUR X-ACT CONTOUR

CUSTOM MOLDED SECOND SEAT FLOOR LINER

TO INSTALL YOUR SECOND SEAT LINER, FIRST MOVE YOUR FRONT ROW SEATS COMPLETELY

FORWARD. THEN, INSTALL YOUR NEW LINER, POSITIONING IT IN THE VEHICLE AS SHOWN ABOVE.

LASTLY, REPOSITION YOUR FRONT ROW SEATS AS DESIRED.