Husky PT #50951 Floor Liner User manual

Hello! I've reviewed the user manual for the Husky Liners X-act Contour 50951 Floor Liner. This document explains how to properly install, clean, and maintain the floor liner, which is custom molded for your vehicle. It emphasizes the removal of factory mats, cleaning with a damp cloth, and which cleaning products should be avoided. I'm here to help with any specific questions you might have.
Do I need to remove factory floor mats before installation?

What can I use to clean the liner?

Are there any cleaning products to avoid?

X-ACT CONTOUR® PT #50951

FLOOR LINERS

View the Husky Liner Lifetime Warranty at www.huskyliners.com/lifetime-warranty 5095 X-act Contour 2nd Seat Floor Liner.docx

6_13_2023

CARE AND USE INSTRUCTIONS

Thank you for selecting an X-act Contour® Floor Liner from Husky Liners. Your new second seat liner is custom

molded to fit your specific vehicle. The liner is made to take the place of your factory floor mat(s). For correct

fit, it is necessary to remove the factory floor mats before installing your new floor liner. However, do not

remove the factory-installed carpeting.

Your liner is made from an engineering resin that is lightweight and extremely tough and durable. The easiest

way to clean your liner is with a damp cloth or sponge. If using a cleaner, 409® or Glass Plus® work well. Use of

Armor All®, Son-of-a-Gun® or similar items is discouraged as these products make the liner slick.

INSTALLATION INSTRUCTIONS FOR YOUR X-ACT CONTOUR

CUSTOM MOLDED SECOND SEAT FLOOR LINER

TO INSTALL YOUR SECOND SEAT LINER, FIRST MOVE YOUR FRONT ROW SEATS COMPLETELY

FORWARD. THEN, INSTALL YOUR NEW LINER, POSITIONING IT IN THE VEHICLE AS SHOWN ABOVE.

LASTLY, REPOSITION YOUR FRONT ROW SEATS AS DESIRED.