Husky Liners 9947 Operating instructions

Brand: Husky Liners

Model: 9947

Type: Operating instructions

Husky Liners 9947 are custom-molded floor liners designed to replace your vehicle's factory floor mats. Made from a lightweight yet durable engineering resin, they are easy to clean with just a damp cloth or sponge and soap and water. Installation is simple: remove the factory floor mats, position the liners in place, and reattach the seats.

Husky Liners 9947 are custom-molded floor liners designed to replace your vehicle's factory floor mats. Made from a lightweight yet durable engineering resin, they are easy to clean with just a damp cloth or sponge and soap and water. Installation is simple: remove the factory floor mats, position the liners in place, and reattach the seats.

WEATHERBEATER® PT #9947

FLOOR LINERS

View the Husky Liner Lifetime Warranty at www.huskyliners.com/lifetime-warranty 9947_Installation_Instruction.docx

6_8_2022

CARE AND USE INSTRUCTIONS

Thank you for selecting an WeatherBeater™ Floor Liners from Husky Liners Inc.

Your new liners are custom molded to fit your specific vehicle’s floor board. The liners

are made to take the place of your factory floor mats. For correct fit, it is necessary to

remove the factory floor mats before installing your new floor liners. However, do not

remove the factory-installed carpeting.

Your liners are made from an engineering resin that is lightweight and extremely

tough and durable. The easiest way to clean your liner is with a damp cloth or sponge

and soap and water. Windex®, 409® and ArmorAll® type cleaners work as well.

INSTALLATION INSTRUCTIONS

FOR YOUR FRONT FLOOR LINERS

TO EASE INSTALLATION OF YOUR NEW FRONT LINERS, MOVE BOTH FRONT ROW SEATS TO THEIR

MOST REARWARD POSITION. WITH THIS DONE, INSTALL THE LINERS AS SHOWN ABOVE. THE

DRIVER AND PASSENGER SIDE LINER WILL ATTACH TO THE FACTORY FLOOR TWIST LOCKS. ONCE

YOU HAVE INSTALLED YOUR LINERS, REPOSITION THE SEATS AS DESIRED.

LEFT OR DRIVER’S

SIDE

RIGHT OR PASSENGER’S

SIDE

WEATHERBEATER® PT #9947

FLOOR LINERS

View the Husky Liner Lifetime Warranty at www.huskyliners.com/lifetime-warranty 9947_Installation_Instruction.docx

6_8_2022

Thank you for selecting an WeatherBeater™ Floor Liners from Husky Liners Inc.

Your new liners are custom molded to fit your specific vehicle’s floor board. The liners

are made to take the place of your factory floor mats. For correct fit, it is necessary to

remove the factory floor mats before installing your new floor liners. However, do not

remove the factory-installed carpeting.

Your liners are made from an engineering resin that is lightweight and extremely

tough and durable. The easiest way to clean your liner is with a damp cloth or sponge

and soap and water. Windex®, 409® and ArmorAll® type cleaners work as well.

INSTALLATION INSTRUCTIONS FOR YOUR

SECOND SEAT FLOOR LINERS

TO EASE INSTALLATION OF YOUR NEW SECOND SEAT LINER, MOVE BOTH FRONT ROW SEATS TO

THEIR MOST FORWARD POSITION. WITH THIS DONE, INSTALL THE LINER AS SHOWN ABOVE.

ONCE YOU HAVE INSTALLED YOUR LINER, REPOSITION THE SEATS AS DESIRED.

1
2

Husky Liners 9947 Operating instructions

Brand: Husky Liners

Model: 9947

Type: Operating instructions

Husky Liners 9947 are custom-molded floor liners designed to replace your vehicle's factory floor mats. Made from a lightweight yet durable engineering resin, they are easy to clean with just a damp cloth or sponge and soap and water. Installation is simple: remove the factory floor mats, position the liners in place, and reattach the seats.

Related papers

Other documents