Husky Liners WeatherBeater Floor Mats, 13021, 14881 Installation guide

Hello! I have reviewed the installation instructions for the Husky Liners WeatherBeater 1488 floor liners designed for a Jeep Gladiator. This document explains how to properly install the liners, emphasizing the need to remove factory mats beforehand. It also details cleaning procedures and materials to avoid. I'm ready to answer your questions about the product and its installation.
What should I do before installing the floor liner?

What is the floor liner made of?

How should I clean the floor liner?

What products should I avoid using on the liner?

What should I do with the front seats before installation?

WEATHERBEATER™ PT #1488

FLOOR LINERS

View the Husky Liner Lifetime Warranty at www.huskyliners.com/lifetime-warranty 1488_Installation Instruction WL.doc

07_08_2019

CARE AND USE INSTRUCTIONS

Thank you for selecting a WeatherBeater® Floor Liner from Husky Liners. Your new 2nd seat liner is custom

molded to fit your Jeep Gladiator. The liner is made to take the place of your factory floor mats. For correct fit,

it is necessary to remove the factory floor mats before installing your new floor liners. However, do not

remove the factory-installed carpeting.

Your liner is made from an engineering resin that is lightweight and extremely tough and durable. The easiest

way to clean your liner is with a damp cloth or sponge. If using a cleaner, 409® or Glass Plus® work well. Use

of Armor All®, Son-of-a-Gun® or similar items is discouraged as these products make the liner slick.

INSTALLATION INSTRUCTIONS FOR YOUR JEEP GLADIATOR

SECOND SEAT FLOOR LINER

TO EASE INSTALLATION OF YOUR 2ND SEAT LINER, FIRST MOVE THE FRONT ROW SEATS TO

THEIR MOST FORWARD POSITIONS. ONCE THE LINER IS INSTALLED, YOU CAN REPOSITION

THE FRONT ROW SEATS AS DESIRED.