2. Husky Liners
  3. 9948
9948

Husky Liners 9948 User manual

  • Hello! I've reviewed the instructions for the Husky Liners WeatherBeater 9948 Floor Liners. The document details how to install and care for these custom-fit floor liners, which are made from a durable resin. I can answer questions regarding installation, cleaning, and other details described in the instructions
  • Do I need to remove the factory carpeting before installing the floor liners?
    What is the best way to clean the floor liners?
    Do I need to reposition seats before installing the front liners?
    Do I need to reposition seats before installing the second seat liner?
WEATHERBEATER® PT #9948
FLOOR LINERS
View the Husky Liner Lifetime Warranty at www.huskyliners.com/lifetime-warranty 9948_Installation_Instruction.docx
6_8_2022
CARE AND USE INSTRUCTIONS
Thank you for selecting an WeatherBeater™ Floor Liners from Husky Liners Inc.
Your new liners are custom molded to fit your specific vehicle’s floor board. The liners
are made to take the place of your factory floor mats. For correct fit, it is necessary to
remove the factory floor mats before installing your new floor liners. However, do not
remove the factory-installed carpeting.
Your liners are made from an engineering resin that is lightweight and extremely
tough and durable. The easiest way to clean your liner is with a damp cloth or sponge
and soap and water. Windex®, 409® and ArmorAll® type cleaners work as well.
INSTALLATION INSTRUCTIONS
FOR YOUR FRONT FLOOR LINERS
TO EASE INSTALLATION OF YOUR NEW FRONT LINERS, MOVE BOTH FRONT ROW SEATS TO THEIR
MOST REARWARD POSITION. WITH THIS DONE, INSTALL THE LINERS AS SHOWN ABOVE. THE
DRIVER AND PASSENGER SIDE LINER WILL ATTACH TO THE FACTORY FLOOR TWIST LOCKS. ONCE
YOU HAVE INSTALLED YOUR LINERS, REPOSITION THE SEATS AS DESIRED.
LEFT OR DRIVER’S
SIDE
RIGHT OR PASSENGER’S
SIDE
WEATHERBEATER® PT #9948
FLOOR LINERS
View the Husky Liner Lifetime Warranty at www.huskyliners.com/lifetime-warranty 9948_Installation_Instruction.docx
6_8_2022
Thank you for selecting an WeatherBeater™ Floor Liners from Husky Liners Inc.
Your new liners are custom molded to fit your specific vehicle’s floor board. The liners
are made to take the place of your factory floor mats. For correct fit, it is necessary to
remove the factory floor mats before installing your new floor liners. However, do not
remove the factory-installed carpeting.
Your liners are made from an engineering resin that is lightweight and extremely
tough and durable. The easiest way to clean your liner is with a damp cloth or sponge
and soap and water. Windex®, 409® and ArmorAll® type cleaners work as well.
INSTALLATION INSTRUCTIONS FOR YOUR
SECOND SEAT FLOOR LINERS
TO EASE INSTALLATION OF YOUR NEW SECOND SEAT LINER, MOVE BOTH FRONT ROW SEATS TO
THEIR MOST FORWARD POSITION. WITH THIS DONE, INSTALL THE LINER AS SHOWN ABOVE.
ONCE YOU HAVE INSTALLED YOUR LINER, REPOSITION THE SEATS AS DESIRED.
/