Gardenlife Bird User manual

1

User Manual for WIFI Camera

www.gardenlife.dk

2

Congratulations on your new nest box with camera.

When you have read and observed these instruc-

tions you are ready to oer the birds in your garden

a new home – and you will be able to watch their

activities on your smartphone or tablet.

3

Note: Connection to camera can only be

established via app.

1. Download the app „IEye“, install and register.

A. NOTE: Only hang up the nest box when the camera is

connected to your smartphone or tablet.

You will nd the IEye app on Google Play or in App Store.

You may also scan the QR codes below.

B. When the app has been installed, open it to register

an account by clicking on “Register” at the bottom of

the page.

Make your personal password.

4

C. Connect smartphone or tablet to the desired WIFI.

D. Open the nest box by removing the screw on the

side of the nest box. This will allow you to push up the

acrylic glass and get free access to the camera.

Connect the 20 m cable to the camera in the nest box.

At the other end connect the adapter to the socket

outlet and turn on – now the camera is active.

Screw

Do not forget to remove the dust lens

5

2. Add WIFI camera to the app.

A. Open the IEye app and press to add a camera.

Choose “Smartlink”.

B. Reset the camera with the black reset button at the

camera cable. Aer app. 15 sec. press until a ding sound

is heard from the camera. Release the button and wait

for a further ding sound. When ok, press “Next” at the

bottom of the app.

Reset button

6

C. The camera must now be connected to the desired

WIFI network. Please check that the network in the

upper window is correct. In the lower window indicate

the code for the network. Then press ”Next”

7

D.

The camera now searches for the network. You will

receive a pop-up with “Setting Success”. This may last

a couple of minutes. If unsuccessful, reset the camera

and try again.

8

E. The camera is connected. Name the camera in the

upper window. In the lower window indicate the code.

The camera code is always: 123456

Press “OK” and „Save“.

9

3. Use of camera

A. To view live, press the picture with the blue arrow.

10

B. Press the camera name – this brings you to Set Up

where you have 3 choices. Press „Settings“.

Here you can adjust time, date and alarm.

11

C. Alarm settings

In case you want a pop-up when a movement near the

camera is registered, go to „Alarm Settings“.

Connect the following: Receive Alarm, Motion

Detection.

12

Return to the list with your cameras. Take care that the

padlock is closed. You open and close by pressing the

padlock

Now you will receive an alarm pop-up when a move-

ment near the camera is registered.

13

4. Delete a camera from the list

Android: Press long on the camera to be removed. Next

you receive a pop-up information and you press ok.

IOS: Place yourself in the camera list. Slide le and

press ”Delete”

14

5. Take photos with the WIFI camera

Go to camera and watch live.

Press on the picture of a camera. You will get a pop-up

with “Snapshot Success”. Next go back to the camera

list, choose “Images” on the app.

Here you will see all pictures taken

with the camera.

When you want to share pictures:

apply the screenshot function of

the smartphone.

15

6. Mounting of the nest box

Now the camera is ok and you can assemble and hang

up the WIFI nest box.

The nest box shall be placed within reach of the wire-

less network.

You will nd the range of the network when you

register the WIFI signal on your smartphone or tablet.

Make sure that the signal is ne where you hang up the

nest box.

We wish you great pleasure.

16

GardenLife

Grønvangsallé 4

6600 Vejen

Tlf: 7536 3800

www.gardenlife.dk

Gardenlife Bird User manual

Gardenlife Bird User manual

Other documents