OBDLink OBDLink User manual

Brand: OBDLink

Model: OBDLink

Type: User manual

OBD

HOSTPOWER

OBD

OST

OWER

'Connect'

button

Android Quick Start Guide

OBDLink LX Bluetooth

Android

Scan the QR code or visit the URL from your Android

device to download the OBDLink app:

obdlink.com/app

Download & install OBDLink app

The DLC is usually found on the driver’s side, under

the dash.

– Can’t nd your DLC? Visit dlc-locator.com

‘POWER’ LED will turn ON, and the ‘BT’ LED will

start ashing slowly.

You must complete steps 7, 8, and

9 within 2 minutes. If you need

more time, press the button again.

Attention!

The ‘BT’ LED will switch to a fast blink.

Tap ‘Scan’ if OBDLink LX does not show in ‘Available

devices’.

– LEDs are o? Check vehicle for blown fuses.

[instructions continue on reverse]

Plug LX Bluetooth into the diagnostic link

connector (DLC)

Turn ignition to Key On, Engine O

position

Open ‘Settings’ app, and enable

‘Bluetooth’

Press the ‘Connect’ button on LX

Tap ‘OBDLink LX’ to pair the deviceTap ‘Bluetooth - Pair with a device’

Wait for OBDLink LX to appear on the

‘Available devices’ list

Thank you for your purchase!

OBD

POWER BT

If you like OBDLink LX Bluetooth,

please post your review on

Launch the OBDLink app, and tap

‘Connect’

Choose ‘Bluetooth’

Choose ‘OBDLink LX’

– Need help? Go to obdlink.com/support

or scan the QR code

– For advanced configurations, go to obdlink.com/setup

or scan the QR code

Once the app establishes a connection with LX, the

‘BT’ LED will turn on solid. Tap ‘Diagnostics’ to start

a scan.

LX will now appear as ‘Paired’:

Tap ‘OK’ in the ‘Bluetooth pairing

request’ dialog

OBDLink OBDLink User manual

OBDLink OBDLink User manual

OBDLink OBDLink User manual

Related papers

Other documents