L I G H T I N G T H E W A Y F O R S I X T Y Y E A R S
WARNING:
Turn Power Off
Electrical Danger
All electrical components must be
installed by a licensed electrician
in accordance with the National
Electric Code and the appropriate
local electrical codes.
ASSEMBLY INSTRUCTION MODEL #ORS-734-MG
How to Install
1. Determine the preferred hanging
height and choose the correct length
of stems needed.
2. Slip the wires through the stems and
connect them together and place the
check ring over the threaded nipple o
top of the fixture body.Screw one end
of the stem assembly onto the fixture
body and the other end onto the
swivel on the canopy.
3. Attach mounting plate to the outlet
box using box screws and Connect
the fixture wires to the supply wires.
4. Mount the fixture to the outlet box
with ball nuts.
5. Place crystal into the frame.
6. Install the bulb (Not included) in
accordance with the fixture’s
specifications. (DO NOT EXCEED
THE MAXIMUM WATTAGE RATING
7. Adjust the arms to the desired
placement.
WARNING:
This product can expose you to Lead
which is known to the State of California to cause canc
and/or birth defects or reproductive harm. For more
information go to www.P65Warnings.ca.gov
CSA841804HAMR1
Ø6"
You will need 4 - Candelabra Bulb
40 Watts Recommended 60 Watts Max
USE LED BULBS FOR EXTENDED USE
This fixture is Dry Rated.
1"
54"
9"
12~54"
Crystorama.com