2. Savoy House
  3. 7-1610-6

Savoy House 7-1610-6 User manual

  • Hello! I've reviewed the assembly instructions for the SAVOY HOUSE Pendant 7-1610-6. This document outlines the step-by-step process for putting together your new pendant light, from connecting the center tube to threading the stems and installing the canopy. I'm here to help you with any questions you might have about these instructions.
  • What is the first step after unpacking?
    What should be done before installing the fixture?
    How is the fixture mounted to the ceiling?
OR
ITEM NO.: 7-1610-6
Stem
Ball Nut (2)
Canopy (1)
Crystal
Crystal
Socket
Bulb
(NOT Included)
Connector (3)
Center Tube (4)
Nipple (5)
Frame
ASSEMBLY INSTRUCTIONS
1. Carefully unpack and identify all parts referring to illustration for parts identification.
2. Turn the power to the installation point OFF.
3. Install the center tube (4) to the nipple (5).
4. Install the connector (3) to the center tube (4).
5. Determine the desired height at which the pendant will be installed and select the stems.
6. Thread the wire through the stems and thread the first stem onto the connector (3), longest stem first.
Repeat process until all required stems are thread together.
7. Refer to the additional installation instructions included with the product for wiring and installation.
8. Install the canopy (1) to the ceiling using the ball nut (2).
9. Install proper bulbs (not included) into each socket referring to the markings and/or labels on the
fixture for maximum wattage.
10.Restore power to the installation point and retain this sheet for future reference.
TOP VIEW
/