Crystorama EMO-5407-BF User manual

Brand: Crystorama

Model: EMO-5407-BF

Type: User manual

Crystorama EMO-5407-BF is a damp-rated chandelier that can be used indoors or outdoors. It requires six candelabra base bulbs (not included) and is compatible with LED bulbs for extended use. The chandelier comes with a mounting plate, screws, anchors, and a canopy for easy installation. It features a banding ring for hanging glass drops and adjustable chain length for customizing the hanging height. The dimensions of the canopy are 5 inches in width, 27-1/2 inches in length, and 3/4 inches in height, while the chain measures 72 inches long and 3.8 millimeters thick.

ASSEMBLYINSTRUCTIONMODEL#EMO-5407-BF

CRYST

RAMA

WARNING: ThisproductcanexposeyoutoLead

whichisknowntothestateofCaliforniatocausecancer

and/orbirthdefectsorreproductiveharm.Formore

informationgotowww.P65Warnings.ca.gov

L I G H T I N GT H EW A YF O RS I X T YY E A R S

WARNING:

ElectricalDanger TurnPoweroff

installedbyalicensedelectrician

inaccordancewiththeNational

Allelectricalcomponentsmustbe

ElectricCodeandtheappropriate

localelectricalcodes.

Youwillneed6-CandelabraBaseBulb

40WattsRecommended60WattsMax.

USELEDBULBSFOREXTENDEDUSE

This fixture is Damp rated

(W1’’xL7-7/8’’)x102sets

Howtoinstall

8.Installthebulbs(notincluded)intothesocket.

1.Feedthewiresthroughthestem.Slipthedownrod

alongwireandthreaditontothenippleontopof

frame.

STEM

LOOP

CHAIN

LOOP

BANDING

RING

GLASSDROP

NIPPLE

WALL ANCHOR

OUTLET BOX SCREW

MOUNTING PLATE

ANCHOR SCREW

MOUNTING SCREW

CANOPY

23-3/4’’

27-1/2’’

3/4’’

5’’

49’’

7-1/4’’

97-1/4’’

FRONTVIEW

SIDEVIEW

2.Placethemountingplateovertheoutletbox.Mark

fourpointsontheceilingatthecenterofthekeyhole

onthemountingplate.

3.Drillfourholesatthemarkedpointsandinsertthe

wallanchors.

4 Placethemountingplateovertheoutletboxand

secureitwithtwooutletboxscrews.Insertthe

anchorscrewsintothewallanchors

(Installedinstep#3)andtighten.

5.Determinethepreferredhangingheightandadjustto

thechainrequired.

6.Installcanopyontothemountingplate,andsecure

withthemountingscrews.

7.Hangglassdroptothebandingring.

Crystorama.com

CRYST

RAMA

L I G H T I N GT H EW A YF O RS I X T YY E A R S

PartNumber

ASSEMBLYINSTRUCTIONMODEL#EMO-5407-BF

PartNumbers

A.(1)-Mountinghardware

I.(102)-GlassdropW1’’xL7-7/8’’

B.(1)-Mountingplate

C.(6)-Mountingscrew

D.(1)-CanopyW5’’xL27-1/2’’xH3/4’’ #XRF5407BFCAN5IN

E.(1)-Chain-L72’’,3.8mmthick#XRF5407BFCHA3.8MM

F.(2)-StemW1/2’’xL12-3/4’’ #XRF5407BFROD12.75IN

H.(6)-Socket

G.(1)-Bandingring#XRF5407BFRING

Crystorama.com

Crystorama EMO-5407-BF User manual

Crystorama EMO-5407-BF User manual

Crystorama EMO-5407-BF User manual

Related papers