Crystorama BRY8008BF User manual

Type
User manual

Crystorama BRY8008BF is a versatile lighting fixture, suitable for both indoor and outdoor use, thanks to its damp rating. It accommodates eight candelabra bulbs, up to 60 watts each, and is compatible with LED bulbs for extended use. Installation requires a licensed electrician and involves assembling the frame, securing the glass panels, attaching the rods to the banding ring, and connecting the canopy to the mounting bar. Enjoy the warm glow of this stylish fixture in your desired space.

Crystorama BRY8008BF is a versatile lighting fixture, suitable for both indoor and outdoor use, thanks to its damp rating. It accommodates eight candelabra bulbs, up to 60 watts each, and is compatible with LED bulbs for extended use. Installation requires a licensed electrician and involves assembling the frame, securing the glass panels, attaching the rods to the banding ring, and connecting the canopy to the mounting bar. Enjoy the warm glow of this stylish fixture in your desired space.

ASSEMBLY INSTRUCTION MODEL#
WARNING: This product can expose you to Lead
which is known to the state of California to cause cancer
and/or birth defects or reproductive harm. For more
information go to www.P65Warnings.ca.gov
LIGHTING THE WAY FOR SIXTY YEARS
CU
Electrical Danger Turn Power off
installed by a licensed electrician
in accordance with the National
All electrical components must be
Electric Code and the appropriate
local electrical codes.
How to install
You will need 8- Cand. Bulb
40 Watts Recommended 60 Watts Max.
USE LED BULBS FOR EXTENDED USE
THE FIXTURE IS DAMP RATED
For Hanging
Install the canopy onto the mounting bar and
secure with the screw collar loop ring.
Install the mounting bar to the outlet box using
two outlet box screws.
Decide the desired hanging height and cut the chain to the proper length.
Place the plate over the top of canopy and secure with the loop.
Install the end of the rod(without the tab) onto the Lower canopy and
secure with a nut. Repeat for all rods.Do not tighten the nut until the end
of step #3.
Spread the rods out equally and align the holes at the tab of rod
with holes in the banding ring. Secure the rods with flat head screws.
Now the nuts inside the canopy can be tightened to secure the roads
in place.
Place the frame over the top of the banding ring by aligning the hole
on the bracket with the hole on the banding.
Secure it with machine screws
Place the frame on a soft cloth covered platform and lay two pieces
of glass on the two adjacent cut outs of the frame.Hold the glass
while aligning the holes on the metal strap with the holes on the frame.
Two persons handling is recommended for this step.
Frosted bulb is recommended!!
Outlet Box
A
B
C
D
N
ASSEMBLY INSTRUCTION MODEL#
LIGHTING THE WAY FOR SIXTY YEARS
Part Number
A. (1)-Mounting Hardware For Hanging
D. (1)-Lower Canopy;W7-1/8"XH3/4"(XSU8008BFCAN7.1INC)
F. (4)-Rods (XSU8008BFSIDEROD)
G. (8)-Flat head Screw
For Hanging
H. (1)-Loop(XSU8004BFLOOP)
I. (6)-Glass;W15-5/8"XH7-1/4" (XSU8008GLA15.6IN)
J. (12)-Machine Screws
K. (8)- Bulb(Not Included)
E. (6)-Metal strap
L. (1)- Plate
B. (1)-Canopy For Hanging;W5-1/2"XH1"(XSU8004BFCAN5.5IN)
C. (1)-Chain;3.8MM(XSU8004BFCHA3.8MM)
M. (4)-Machine Screw
N. (4)-Bracket
O. (1)-Banding ring
P. (1)-Frame
  • Page 1 1
  • Page 2 2

Crystorama BRY8008BF User manual

Type
User manual

Crystorama BRY8008BF is a versatile lighting fixture, suitable for both indoor and outdoor use, thanks to its damp rating. It accommodates eight candelabra bulbs, up to 60 watts each, and is compatible with LED bulbs for extended use. Installation requires a licensed electrician and involves assembling the frame, securing the glass panels, attaching the rods to the banding ring, and connecting the canopy to the mounting bar. Enjoy the warm glow of this stylish fixture in your desired space.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI