Crystorama EMO-5403-BF Installation guide

  • Hello! I've reviewed the assembly instructions for the CRYSTROMA EMO-5403-BF light fixture. This document details the steps needed to mount the fixture, install the backplate, add bulbs, and hang the glass drops. The fixture is designed for damp locations and uses candelabra base bulbs. I'm here to answer your questions about this product and its installation.
  • What type of bulbs are required?
    Is this fixture suitable for damp locations?
    What are the basic steps for installation?
ASSEMBLYINSTRUCTIONMODEL#EMO-5403-BF
CRYST
RAMA
WARNING:
ElectricalDanger TurnPoweroff
WARNING: ThisproductcanexposeyoutoLead
whichisknowntothestateofCaliforniatocausecancer
and/orbirthdefectsorreproductiveharm.Formore
informationgotowww.P65Warnings.ca.gov
L I G H T I N GT H EW A YF O RS I X T YY E A R S
installedbyalicensedelectrician
inaccordancewiththeNational
Allelectricalcomponentsmustbe
ElectricCodeandtheappropriate
localelectricalcodes.
Youwillneed4-CandelabraBaseBulb
40WattsRecommended60WattsMax.
USELEDBULBSFOREXTENDEDUSE
This fixture is Damp rated
E= (W1xL7-7/8)x27sets
4.Hangglassdroptothebandingring.
3.Installthebulb(notincluded)intothesocket.
Howtoinstall
2.Installbackplateontothemountingplate,and
securewiththefinials.
1.Threadthemountingscrewsintothematching
holesinthemountingplate.Securethemounting
platetooutletboxwiththeoutletboxscrews.
MOUNTINGSCREW
MOUNTINGPLATE
OUTLETBOXSCREW
BACKPLATE
BANDINGRING
GLASSDROP
5
9-3/8
6-1/2
2-7/8
3-5/8
24
7-1/4
3/4
FRONTVIEW SIDEVIEW
TOPVIEW
FINIAL
Crystorama.com
CRYST
RAMA
L I G H T I N GT H EW A YF O RS I X T YY E A R S
PartNumber
PartNumbers
A.(1)-Mountinghardware
B.(1)-BackplateL7-1/4xW5xH3/4’ #XRF5403BFBKP7.25IN
C.(1)-Bandingring#XRF5403BFRING
D.(2)-Finial
ASSEMBLYINSTRUCTIONMODEL#EMO-5403-BF
F.(4)-Socket
A
E.(27)-Glassdrop
D
B
C
E
F
Crystorama.com
/