Intel CELERON GENE-8310 User manual
- Category
- Motherboards
- Type
- User manual
This manual is also suitable for
Intel CELERON GENE-8310 is a compact and versatile embedded system board designed for industrial applications. With an onboard Intel Celeron M processor, it offers high performance and low power consumption. Features include 48-bit dual-channel LVDS TFT LCD support, 10/100Mbps Ethernet, AC-97 3D surround 5.1 channel audio, two COM ports, four USB 2.0 ports, TV-out, DVI, digital I/O, and a CompactFlash slot.
Intel CELERON GENE-8310 is a compact and versatile embedded system board designed for industrial applications. With an onboard Intel Celeron M processor, it offers high performance and low power consumption. Features include 48-bit dual-channel LVDS TFT LCD support, 10/100Mbps Ethernet, AC-97 3D surround 5.1 channel audio, two COM ports, four USB 2.0 ports, TV-out, DVI, digital I/O, and a CompactFlash slot.
SubCompact Board GENE-8310
GENE-8310
Intel
®
Celeron
®
M Processor
Subcompact Board
With LVDS, Ethernet,
6 Channel Audio & Mini PCI
GENE-8310 Rev. A Manual 2nd Ed.
Jan. 2006
SubCompact Board GENE-8310
i
Copyright Notice
This document is copyrighted, 2006. All rights are reserved. The
original manufacturer reserves the right to make improvements
to the products described in this manual at any time without
notice.
No part of this manual may be reproduced, copied, translated,
or transmitted in any form or by any means without the prior
written permission of the original manufacturer. Information
provided in this manual is intended to be accurate and reliable.
However, the original manufacturer assumes no responsibility
for its use, or for any infringements upon the rights of third
parties that may result from its use.
The material in this document is for product information only
and is subject to change without notice. While reasonable
efforts have been made in the preparation of this document to
assure its accuracy, AAEON assumes no liabilities resulting
from errors or omissions in this document, or from the use of the
information contained herein.
AAEON reserves the right to make changes in the product
design without notice to its users.
SubCompact Board GENE-8310
ii
Acknowledgments
All other products’ name or trademarks are properties of their
respective owners.
Award is a trademark of Award Software International, Inc.
CompactFlash™ is a trademark of the Compact Flash
Association.
Intel
®
, Pentium
®
M, and Celeron
®
M are trademarks of Intel
®
Corporation.
Microsoft Windows
®
is a registered trademark of Microsoft Corp.
ITE is a trademark of Integrated Technology Express, Inc.
IBM, PC/AT, PS/2, and VGA are trademarks of International
Business Machines Corporation.
SoundBlaster is a trademark of Creative Labs, Inc.
Please be notified that all other products’ name or trademarks not be
mentioned above are properties of their respective owners.
SubCompact Board GENE-8310
iii
Packing List
Before you begin installing your card, please make sure that the
following materials have been shipped:
• 1 GENE-8310 CPU Card
• 1 IDE Cable
• 1 KB/Mouse Cable
• 2 USB Cable
• 1 Audio Cable
• 1 COM Port Cable
• 1 TV-out and S-terminal Cable
• 1 DVI Cable
• 1 Parallel Port Cable
• 1 Jumper Cap
• 1 Quick Installation Guide
• 1 CD-ROM for manual (in PDF format) and drivers
If any of these items should be missing or damaged, please
contact your distributor or sales representative immediately.
SubCompact Board GENE-8310
iv
Contents
Chapter 1 General Information
1.1 Introduction................................................................1-2
1.2 Features....................................................................1-4
1.3 Specifications............................................................1-5
Chapter 2 Quick Installation Guide
2.1 Safety Precautions....................................................2-2
2.2 Location of Connectors and Jumpers .......................2-3
2.3 Mechanical Drawing..................................................2-5
2.4 List of Jumpers.......................................................... 2-7
2.5 List of Connectors .....................................................2-8
2.6 Setting Jumpers ........................................................2-10
2.7 Clear CMOS Selection (JP1) ....................................2-11
2.8 LCD Voltage Selection (JP2) ....................................2-11
2.9 COM2 RI/+5V Selection (JP5) ..................................2-11
2.10 USB Connector (CN1).............................................2-11
2.11 USB Connector (CN2).............................................2-12
2.12 Primary IDE Hard Drive Connector (CN3) ..............2-13
2.13 Digital IO Connector (CN4).....................................2-13
2.14 Front Panel (CN5)...................................................2-14
2.15 Serial Port COM2 Connector (CN6)........................2-14
2.16 Parallel Port Connector (CN7) ................................2-15
2.17 Dual Channel LVDS Connector (CN8)....................2-16
SubCompact Board GENE-8310
v
2.18 4P Power Connector (CN9) ....................................2-16
2.19 TV-out Connector (CN10).......................................2-17
2.20 DVI Connector (CN11)............................................2-17
2.21 Audio Input/Output Connector (CN12)....................2-17
2.22 Ethernet 10/100 BaseT RJ-45 Phone Jack Connector
(CN13).............................................................................2-18
2.23 External 5VSB/PWRGD Connector (CN14)............2-18
2.24 IrDA Connector (CN15)...........................................2-18
2.25 Fan Connector (CN16)............................................2-19
2.26 Mini-DIN PS/2 Connector (CN17)...........................2-19
2.27 Serial Port COM1 Connector (CN18)......................2-19
2.28 CRT Display Connector (CN19)..............................2-20
2.29 External Battery (VBAT2)........................................2-20
2.30 Mini PCI Slot (MPCI1).............................................2-20
2.31 CompactFlash Disk Slot (CFD1).............................2-20
Chapter 3 Award BIOS Setup
3.1 System Test and Initialization. ..................................3-2
3.2 Award BIOS Setup....................................................3-3
Chapter 4 Driver Installation
4.1 Installation.................................................................4-3
Appendix A Programming The Watchdog Timer
A.1 Programming .........................................................A-2
A.2 IT8712 Watchdog Timer Initial Program................A-6
SubCompact Board GENE-8310
vi
Appendix B I/O Information
B.1 I/O Address Map....................................................B-2
B.2 1
st
MB Memory Address Map ................................B-2
B.3 IRQ Mapping Chart................................................B-3
B.4 DMA Channel Assignments...................................B-3
SubCompact Board GENE-8310
Chapter 1 General Information 1- 1
General
Chapter
1
Information
SubCompact Board GENE-8310
Chapter 1 General Information 1-2
1.1 Introduction
The GENE-8310 is the third generation of fanless solutions that
AAEON has released through their original design. It is more
advanced than previous SubCompact Boards, with higher
performance and lower power consumption. We believe the
GENE-8310 will become one of the best choices for our customers
who need a higher requirement in processor ability with excellent
power consumption control.
The GENE-8310 derives its excellent functionality from several
distinctive features:
Superb Performance and Controllable Power Usage
The Gene-8310 utilizes the newest generation Intel
®
Ultra Low
Voltage Celeron
®
processor and chipset. With its low-power
consumption platform, the GENE-8310 offers a stable and efficient
computing platform which not only exceeds past products but also
solves your problem when attempting to balance performance and
power consumption. The obvious benefit is that the GENE-8310 is
more flexible and can be used widely even in development for a
new application field.
Multiple Display Modes
The previous generation of fanless 3.5” SubCompact Boards can
usually provide a basic display mode due to the limitation of board
size and power consumption; nevertheless, the GENE-8310 offers
diverse display modes based upon the support provided by the
SubCompact Board GENE-8310
Chapter 1 General Information
1-3
Intel
®
platform. It has the best graphics capability among current
3.5” SubCompact Boards. In addition, the GENE-8310 supports
CRT, LCD, DVI and TV-out which can meet your requirements. The
result is you will never need to worry about the limitations of board
size and power consumption using this SubCompact Board for
sophisticated graphics output.
Wide Expansion Capability
Although the GENE-8310 measures only 5.75” x 4”, that does not
affect its expansion ability because of the presence of an onboard
Mini PCI slot. Hence, the GENE-8310 allows a greater variety of
expansion interfaces in a very small space. Compared with PC/104
modules, Mini PCI modules are cheaper in price and more helpful
for saving system space. The GENE-8310 is the optimum 3.5”
Board for expansion capability.
Not all customers have needs that can be easily satisfied by a 3.5”
board that only has limited features due to its small-size and fanless
operation. The GENE-8310 has been endowed by our engineers
with features that can meet the high CPU loads of complex
application needs with higher performance and multiple functionality.
This SubCompact Board will meet the stringent demands of the
embedded market by fulfilling the requirements of faster processor
speed with fanless operation, better graphics and small size.
SubCompact Board GENE-8310
Chapter 1 General Information 1-4
1.2 Features
• Onboard Intel
®
Celeron
®
M or Mobile Intel
®
Celeron
®
Processor at 600MHz 0K L2 Cache Processor
• 48-bit Dual Channels LVDS TFT LCD
• 10/100Mbps Fast Ethernet
• AC-97 3D Surround 5.1 Channel Audio
• Supports Type II CompactFlash™ Memory
• 2 COM / 4 USB2.0 / TV-out / DVI / Digital I/O
• + 5V Only Operation
SubCompact Board GENE-8310
Chapter 1 General Information
1-5
1.3 Specifications
System
• CPU: Onboard Mobile Intel
®
Celeron
®
Processor at 600MHz with 0K
L2 Cache or Intel
®
Celeron
®
M
Processor 1.3GHz
Memory: 200-pin DDR SODIMM x 1, Max.
1GB (DDR 266MHz)
Chipset: Intel
®
852GM + 82801 DB
(ICH4)
I/O Chipset: ITE IT8712IX
Ethernet: Intel
®
82562, 10/100Base-TX
RJ-45
BIOS: AWARD 512KB FLASH ROM
Watchdog Timer: Generates a Time-out System
Reset
H/W Status Monitoring: Supports Power Supply
Voltages and Temperatures
Monitoring
SSD: Type II CompactFlash™ slot x 1
Expansion Interface: Type III Mini PCI Socket x 1
Battery: Lithium battery
Power Supply Voltage:+5V, AT/ATX
Board Size: 5.75”(L) x 4”(W) (146mm x
SubCompact Board GENE-8310
Chapter 1 General Information 1-6
101.6mm)
Gross Weight: 0.88lb (0.4kg)
Operating Temperature: 32°F~140°F (0°C~60°C)
Display
Chip: Intel
®
852GM + Chrontel 7009
Memory: Shared System Memory Up to
64MB with DVMT
Resolutions: Up to 1280 x 1024 @ 32bpp
Colors for CRT;
Up to 1280 x 1024 @ 24bpp
Colors for LCD
TV-Out: Supports NTSC and PAL
standard
Internal Graphics: Supports CRT/LCD, CRT/TV,
CRT/DVI, LCD/DVI and LCD/TV
Dual View/ Simultaneous
Display
I/O
MIO: EIDE x 1(UDMA33 x 1), KB +
Mouse x 1, RS-232 x 1,
RS-232/422/485 x 1, Parallel x 1
IrDA: One IrDA Tx/Rx Header
Audio: MIC in, Line in, Line out 5.1
Output
SubCompact Board GENE-8310
Chapter 1 General Information
1-7
USB: Two 5 x 2 Pin Headers Support
4 USB 2.0 Ports (Does not
support Wake-up function)
SubCompact Board GENE-8310
Chapter 2 Quick Installation Guide 2-1
Quick
Installation
Chapter
2
Guide
Notice:
The Quick Installation Guide is derive
d
f
rom Chapter 2 of user manual. For othe
r
chapters and further installation
instructions, please refer to the use
r
manual CD-ROM that came with th
e
p
roduct.
Part No. 2007831011 Printed in Taiwan JAN. 2006
SubCompact Board GENE-8310
Chapter 2 Quick Installation Guide 2-2
2.1 Safety Precautions
Always completely disconnect the power cord
from your board whenever you are working on
it. Do not make connections while the power is
on, because a sudden rush of power can
damage sensitive electronic components.
Always ground yourself to remove any static
charge before touching the board. Modern
electronic devices are very sensitive to static
electric charges. Use a grounding wrist strap at
all times. Place all electronic components on a
static-dissipative surface or in a static-shielded
bag when they are not in the chassis
SubCompact Board GENE-8310
Chapter 2 Quick Installation Guide 2-3
2.2 Location of Connectors and Jumpers
Component Side
1
5
5
1
1
6
9
1
0
1
2
1
1
2
1
8
7
MPCI1
CN15
CN13
CN10
CN17
CN18
CN11
CN8
CN16
CN19
CN9
C
N
1
C
N
6
C
N
3
C
N
2
C
N
4
C
N
5
C
N
1
4
C
N
7
J
P
5
C
N
1
2
J
P
2
JP1
The Height of Cooling System Depends on Customer Cooling Device.
NOTE:
SubCompact Board GENE-8310
Chapter 2 Quick Installation Guide 2-4
Solder Side
CFD1
DIMM1
SubCompact Board GENE-8310
Chapter 2 Quick Installation Guide 2-5
2.3 Mechanical Drawing
Component Side
1
5
5
1
1
6
9
1
0
1
2
1
1
2
1
8
7
0.00
0
.
0
0
8.89
1
.
3
2
8.89
3
.
2
3
0.27
6.99
5
.
0
3
5
.
4
7
1
6
.
9
0
2
8
.
3
3
3
9
.
7
6
5
1
.
1
9
5
0
.
7
5
7
8
.
0
5
0.00
9
5
.
2
0
23.50
9
5
.
8
3
41.59
6
3
.
4
5
8
4
.
7
7
50.31
43.99
52.60
29.22
8
1
.
5
8
7
2
.
3
5
54.15
9
1
.
0
0
79.38
9
0
.
7
9
90.17
114.94
133.93
7
8
.
6
9
9
5
.
2
0
9
8
.
3
7
137.16
133.93
0
.
0
0
3
.
2
3
137.16
(
1
0
3
.
5
1
)
(
7
7
.
4
7
)
(
4
6
.
9
9
)
(
2
2
.
2
3
)
(14.15)
(7.88)
(6.45)
(7.88)
(1.60)
(13.35)
114.30
0
.
5
8
72.39
0
.
5
8
8
7
.
5
8
109.22
The Height of Cooling System Depends on Customer Cooling Device.
NOTE:
6
2
.
8
1
7
6
.
4
7
1.91
0.32
SubCompact Board GENE-8310
Chapter 2 Quick Installation Guide 2-6
Solder Side
0.00
0
.
0
0
3
.
2
3
8.89
0.00
9
5
.
2
0
9
8
.
3
7
8.89
72.39
114.30
133.93
0
.
0
0
133.93
9
5
.
2
0
109.22
0
.
5
8
0
.
5
8
8
7
.
5
8
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
Intel CELERON GENE-8310 User manual
- Category
- Motherboards
- Type
- User manual
- This manual is also suitable for
Intel CELERON GENE-8310 is a compact and versatile embedded system board designed for industrial applications. With an onboard Intel Celeron M processor, it offers high performance and low power consumption. Features include 48-bit dual-channel LVDS TFT LCD support, 10/100Mbps Ethernet, AC-97 3D surround 5.1 channel audio, two COM ports, four USB 2.0 ports, TV-out, DVI, digital I/O, and a CompactFlash slot.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI