Intel CELERON GENE-8310 User manual

SubCompact Board GENE-8310

GENE-8310

Intel

®

Celeron

®

M Processor

Subcompact Board

With LVDS, Ethernet,

6 Channel Audio & Mini PCI

GENE-8310 Rev. A Manual 2nd Ed.

Jan. 2006

SubCompact Board GENE-8310

i

Copyright Notice

This document is copyrighted, 2006. All rights are reserved. The

original manufacturer reserves the right to make improvements

to the products described in this manual at any time without

notice.

No part of this manual may be reproduced, copied, translated,

or transmitted in any form or by any means without the prior

written permission of the original manufacturer. Information

provided in this manual is intended to be accurate and reliable.

However, the original manufacturer assumes no responsibility

for its use, or for any infringements upon the rights of third

parties that may result from its use.

The material in this document is for product information only

and is subject to change without notice. While reasonable

efforts have been made in the preparation of this document to

assure its accuracy, AAEON assumes no liabilities resulting

from errors or omissions in this document, or from the use of the

information contained herein.

AAEON reserves the right to make changes in the product

design without notice to its users.

SubCompact Board GENE-8310

ii

Acknowledgments

All other products’ name or trademarks are properties of their

respective owners.

 Award is a trademark of Award Software International, Inc.

 CompactFlash™ is a trademark of the Compact Flash

Association.

 Intel

®

, Pentium

®

M, and Celeron

®

M are trademarks of Intel

®

Corporation.

 Microsoft Windows

®

is a registered trademark of Microsoft Corp.

 ITE is a trademark of Integrated Technology Express, Inc.

 IBM, PC/AT, PS/2, and VGA are trademarks of International

Business Machines Corporation.

 SoundBlaster is a trademark of Creative Labs, Inc.

Please be notified that all other products’ name or trademarks not be

mentioned above are properties of their respective owners.

SubCompact Board GENE-8310

iii

Packing List

Before you begin installing your card, please make sure that the

following materials have been shipped:

• 1 GENE-8310 CPU Card

• 1 IDE Cable

• 1 KB/Mouse Cable

• 2 USB Cable

• 1 Audio Cable

• 1 COM Port Cable

• 1 TV-out and S-terminal Cable

• 1 DVI Cable

• 1 Parallel Port Cable

• 1 Jumper Cap

• 1 Quick Installation Guide

• 1 CD-ROM for manual (in PDF format) and drivers

If any of these items should be missing or damaged, please

contact your distributor or sales representative immediately.

SubCompact Board GENE-8310

iv

Contents

Chapter 1 General Information

1.1 Introduction................................................................1-2

1.2 Features....................................................................1-4

1.3 Specifications............................................................1-5

Chapter 2 Quick Installation Guide

2.1 Safety Precautions....................................................2-2

2.2 Location of Connectors and Jumpers .......................2-3

2.3 Mechanical Drawing..................................................2-5

2.4 List of Jumpers.......................................................... 2-7

2.5 List of Connectors .....................................................2-8

2.6 Setting Jumpers ........................................................2-10

2.7 Clear CMOS Selection (JP1) ....................................2-11

2.8 LCD Voltage Selection (JP2) ....................................2-11

2.9 COM2 RI/+5V Selection (JP5) ..................................2-11

2.10 USB Connector (CN1).............................................2-11

2.11 USB Connector (CN2).............................................2-12

2.12 Primary IDE Hard Drive Connector (CN3) ..............2-13

2.13 Digital IO Connector (CN4).....................................2-13

2.14 Front Panel (CN5)...................................................2-14

2.15 Serial Port COM2 Connector (CN6)........................2-14

2.16 Parallel Port Connector (CN7) ................................2-15

2.17 Dual Channel LVDS Connector (CN8)....................2-16

SubCompact Board GENE-8310

v

2.18 4P Power Connector (CN9) ....................................2-16

2.19 TV-out Connector (CN10).......................................2-17

2.20 DVI Connector (CN11)............................................2-17

2.21 Audio Input/Output Connector (CN12)....................2-17

2.22 Ethernet 10/100 BaseT RJ-45 Phone Jack Connector

(CN13).............................................................................2-18

2.23 External 5VSB/PWRGD Connector (CN14)............2-18

2.24 IrDA Connector (CN15)...........................................2-18

2.25 Fan Connector (CN16)............................................2-19

2.26 Mini-DIN PS/2 Connector (CN17)...........................2-19

2.27 Serial Port COM1 Connector (CN18)......................2-19

2.28 CRT Display Connector (CN19)..............................2-20

2.29 External Battery (VBAT2)........................................2-20

2.30 Mini PCI Slot (MPCI1).............................................2-20

2.31 CompactFlash Disk Slot (CFD1).............................2-20

Chapter 3 Award BIOS Setup

3.1 System Test and Initialization. ..................................3-2

3.2 Award BIOS Setup....................................................3-3

Chapter 4 Driver Installation

4.1 Installation.................................................................4-3

Appendix A Programming The Watchdog Timer

A.1 Programming .........................................................A-2

A.2 IT8712 Watchdog Timer Initial Program................A-6

SubCompact Board GENE-8310

vi

Appendix B I/O Information

B.1 I/O Address Map....................................................B-2

B.2 1

st

MB Memory Address Map ................................B-2

B.3 IRQ Mapping Chart................................................B-3

B.4 DMA Channel Assignments...................................B-3

SubCompact Board GENE-8310

Chapter 1 General Information 1- 1

General

Chapter

1

Information

SubCompact Board GENE-8310

Chapter 1 General Information 1-2

1.1 Introduction

The GENE-8310 is the third generation of fanless solutions that

AAEON has released through their original design. It is more

advanced than previous SubCompact Boards, with higher

performance and lower power consumption. We believe the

GENE-8310 will become one of the best choices for our customers

who need a higher requirement in processor ability with excellent

power consumption control.

The GENE-8310 derives its excellent functionality from several

distinctive features:

Superb Performance and Controllable Power Usage

The Gene-8310 utilizes the newest generation Intel

®

Ultra Low

Voltage Celeron

®

processor and chipset. With its low-power

consumption platform, the GENE-8310 offers a stable and efficient

computing platform which not only exceeds past products but also

solves your problem when attempting to balance performance and

power consumption. The obvious benefit is that the GENE-8310 is

more flexible and can be used widely even in development for a

new application field.

Multiple Display Modes

The previous generation of fanless 3.5” SubCompact Boards can

usually provide a basic display mode due to the limitation of board

size and power consumption; nevertheless, the GENE-8310 offers

diverse display modes based upon the support provided by the

SubCompact Board GENE-8310

Chapter 1 General Information

1-3

Intel

®

platform. It has the best graphics capability among current

3.5” SubCompact Boards. In addition, the GENE-8310 supports

CRT, LCD, DVI and TV-out which can meet your requirements. The

result is you will never need to worry about the limitations of board

size and power consumption using this SubCompact Board for

sophisticated graphics output.

Wide Expansion Capability

Although the GENE-8310 measures only 5.75” x 4”, that does not

affect its expansion ability because of the presence of an onboard

Mini PCI slot. Hence, the GENE-8310 allows a greater variety of

expansion interfaces in a very small space. Compared with PC/104

modules, Mini PCI modules are cheaper in price and more helpful

for saving system space. The GENE-8310 is the optimum 3.5”

Board for expansion capability.

Not all customers have needs that can be easily satisfied by a 3.5”

board that only has limited features due to its small-size and fanless

operation. The GENE-8310 has been endowed by our engineers

with features that can meet the high CPU loads of complex

application needs with higher performance and multiple functionality.

This SubCompact Board will meet the stringent demands of the

embedded market by fulfilling the requirements of faster processor

speed with fanless operation, better graphics and small size.

SubCompact Board GENE-8310

Chapter 1 General Information 1-4

1.2 Features

• Onboard Intel

®

Celeron

®

M or Mobile Intel

®

Celeron

®

Processor at 600MHz 0K L2 Cache Processor

• 48-bit Dual Channels LVDS TFT LCD

• 10/100Mbps Fast Ethernet

• AC-97 3D Surround 5.1 Channel Audio

• Supports Type II CompactFlash™ Memory

• 2 COM / 4 USB2.0 / TV-out / DVI / Digital I/O

• + 5V Only Operation

SubCompact Board GENE-8310

Chapter 1 General Information

1-5

1.3 Specifications

System

• CPU: Onboard Mobile Intel

®

Celeron

®

Processor at 600MHz with 0K

L2 Cache or Intel

®

Celeron

®

M

Processor 1.3GHz

 Memory: 200-pin DDR SODIMM x 1, Max.

1GB (DDR 266MHz)

 Chipset: Intel

®

852GM + 82801 DB

(ICH4)

 I/O Chipset: ITE IT8712IX

 Ethernet: Intel

®

82562, 10/100Base-TX

RJ-45

 BIOS: AWARD 512KB FLASH ROM

 Watchdog Timer: Generates a Time-out System

Reset

 H/W Status Monitoring: Supports Power Supply

Voltages and Temperatures

Monitoring

 SSD: Type II CompactFlash™ slot x 1

 Expansion Interface: Type III Mini PCI Socket x 1

 Battery: Lithium battery

 Power Supply Voltage:+5V, AT/ATX

 Board Size: 5.75”(L) x 4”(W) (146mm x

SubCompact Board GENE-8310

Chapter 1 General Information 1-6

101.6mm)

 Gross Weight: 0.88lb (0.4kg)

 Operating Temperature: 32°F~140°F (0°C~60°C)

Display

 Chip: Intel

®

852GM + Chrontel 7009

 Memory: Shared System Memory Up to

64MB with DVMT

 Resolutions: Up to 1280 x 1024 @ 32bpp

Colors for CRT;

Up to 1280 x 1024 @ 24bpp

Colors for LCD

 TV-Out: Supports NTSC and PAL

standard

 Internal Graphics: Supports CRT/LCD, CRT/TV,

CRT/DVI, LCD/DVI and LCD/TV

Dual View/ Simultaneous

Display

I/O

 MIO: EIDE x 1(UDMA33 x 1), KB +

Mouse x 1, RS-232 x 1,

RS-232/422/485 x 1, Parallel x 1

 IrDA: One IrDA Tx/Rx Header

 Audio: MIC in, Line in, Line out 5.1

Output

SubCompact Board GENE-8310

Chapter 1 General Information

1-7

 USB: Two 5 x 2 Pin Headers Support

4 USB 2.0 Ports (Does not

support Wake-up function)

SubCompact Board GENE-8310

Chapter 2 Quick Installation Guide 2-1

Quick

Installation

Chapter

2

Guide

Notice:

The Quick Installation Guide is derive

d

f

rom Chapter 2 of user manual. For othe

r

chapters and further installation

instructions, please refer to the use

r

manual CD-ROM that came with th

e

p

roduct.

Part No. 2007831011 Printed in Taiwan JAN. 2006

SubCompact Board GENE-8310

Chapter 2 Quick Installation Guide 2-2

2.1 Safety Precautions

Always completely disconnect the power cord

from your board whenever you are working on

it. Do not make connections while the power is

on, because a sudden rush of power can

damage sensitive electronic components.

Always ground yourself to remove any static

charge before touching the board. Modern

electronic devices are very sensitive to static

electric charges. Use a grounding wrist strap at

all times. Place all electronic components on a

static-dissipative surface or in a static-shielded

bag when they are not in the chassis

SubCompact Board GENE-8310

Chapter 2 Quick Installation Guide 2-3

2.2 Location of Connectors and Jumpers

Component Side

1

5

1

6

9

1

0

1

2

1

2

1

8

7

MPCI1

CN15

CN13

CN10

CN17

CN18

CN11

CN8

CN16

CN19

CN9

C

N

1

C

N

6

C

N

3

C

N

2

C

N

4

C

N

5

C

N

1

4

C

N

7

J

P

5

C

N

1

2

J

P

2

JP1

The Height of Cooling System Depends on Customer Cooling Device.

NOTE:

SubCompact Board GENE-8310

Chapter 2 Quick Installation Guide 2-4

Solder Side

CFD1

DIMM1

SubCompact Board GENE-8310

Chapter 2 Quick Installation Guide 2-5

2.3 Mechanical Drawing

Component Side

1

5

1

6

9

1

0

1

2

1

2

1

8

7

0.00

0

.

0

8.89

1

.

3

2

8.89

3

.

2

3

0.27

6.99

5

.

0

3

5

.

4

7

1

6

.

9

0

2

8

.

3

9

.

7

6

5

1

.

1

9

5

0

.

7

5

7

8

.

0

5

0.00

9

5

.

2

0

23.50

9

5

.

8

3

41.59

6

3

.

4

5

8

4

.

7

50.31

43.99

52.60

29.22

8

1

.

5

8

7

2

.

3

5

54.15

9

1

.

0

79.38

9

0

.

7

9

90.17

114.94

133.93

7

8

.

6

9

5

.

2

0

9

8

.

3

7

137.16

133.93

0

.

0

3

.

2

3

137.16

(

1

0

3

.

5

1

)

(

7

.

4

7

)

(

4

6

.

9

)

(

2

.

2

3

)

(14.15)

(7.88)

(6.45)

(7.88)

(1.60)

(13.35)

114.30

0

.

5

8

72.39

0

.

5

8

7

.

5

8

109.22

The Height of Cooling System Depends on Customer Cooling Device.

NOTE:

6

2

.

8

1

7

6

.

4

7

1.91

0.32

SubCompact Board GENE-8310

Chapter 2 Quick Installation Guide 2-6

Solder Side

0.00

0

.

0

3

.

2

3

8.89

0.00

9

5

.

2

0

9

8

.

3

7

8.89

72.39

114.30

133.93

0

.

0

133.93

9

5

.

2

0

109.22

0

.

5

8

0

.

5

8

7

.

5

8

Page is loading ...

Intel CELERON GENE-8310 User manual

This manual is also suitable for

Intel CELERON GENE-8310 User manual

Related papers

Other documents