1
CNet Technology Inc.
www.CNet.com.tw
User Manual
Wireless-N PCI Adapter
Model: CWP-905
2
CNet Technology Inc.
www.CNet.com.tw
Contents
Notice .................................................................................... 3
Installing the software of PCI Adapter .................................. 4
Configuring your wireless network (with Microsoft Zero
Configuration Tool) ............................................................. 10
Wi-Fi Protect Setup (WPS) .................................................. 11
Pin Input Config (PIN) ........................................................................... 12
Push Button (PBC) ................................................................................... 14
Link Information ................................................................. 16
Profile ................................................................................. 17
Advanced ............................................................................. 18
About .................................................................................. 19
Uninstalling the software .................................................... 20
Federal Communication Commission Interference Statement ....... 23
3
CNet Technology Inc.
www.CNet.com.tw
Notice
You can fine tune the antenna to get better performance. Below is the
sample.
4
CNet Technology Inc.
www.CNet.com.tw
Installing the software of PCI Adapter
1. Select the file CNet Wireless LAN Utility.exe on product CD to install.
The setup program will detect user’s language automatically.
2. You can choose Install driver and CNet WLAN Utility or Install
driver only. Please click the “Next” button to continue.
3. The setup program is ready to begin installation. Please click the
“Install” button.
5
CNet Technology Inc.
www.CNet.com.tw
4. The software installation should begin. This may take a few minutes.
5. Once the installation complete, you may now configure your wireless
network.
6
CNet Technology Inc.
www.CNet.com.tw
Configuring your wireless network (with Wireless Utility)
1. Windows XP users, if you chose “Microsoft Zero Configuration Tool”
during the software installation please skip to page 8.
2. Double click wireless signal icon in your taskbar.
3. It should pop up the Wireless Utility window, then utility shows the
connecting wireless network that connected automatically.
7
CNet Technology Inc.
www.CNet.com.tw
4. Click the “Site Survey” button to the Site Survey page. Click the
“Rescan” button to scan the area for wireless network(s). Once the scan
completed, select the desired wireless network from the list and click
the “Add to Profile” button.
Site Survey
Add to Profile
Rescan
8
CNet Technology Inc.
www.CNet.com.tw
5. Profile window will pop up. Click “Next” button.
6. Make sure your wireless authentication and click “Next” button.
7. Please enter key if you use WEP/WPA-PSK/WPA2-PSK as Authentication
method, and click “Next” button.
next
next
next
9
CNet Technology Inc.
www.CNet.com.tw
8. Check or uncheck “Use Pre-logon Connection”, and click “Next” button.
9. Click the profile and “connect” button, and you will connect the wireless
access point.
10. When you connected the wireless network, the utility will show SSID,
Rate, Channel, IP Address, and Mask.
next
10
CNet Technology Inc.
www.CNet.com.tw
Configuring your wireless network (with Microsoft Zero
Configuration Tool)
Warning: Due to security reasons, we strongly recommend updating
Windows XP to service pack 3 or above.
1. Please right click the wireless utility icon in taskbar and select “Use Zero
configuration as configuration utility”.
2. Once using Microsoft Zero Configuration Tool to configure wireless
network, Wireless Utility will be can not configure.
11
CNet Technology Inc.
www.CNet.com.tw
Wi-Fi Protect Setup (WPS)
WPS is an easy and secure setup solution for Wi-Fi network. Please click
Profile and Add WPS Profile to enter setup windows. PCI adapter has
two methods, PIN (Pin Input Config) and PBC (Push Button Config), to
setup the network.
Profile
Add WPS Profile
12
CNet Technology Inc.
www.CNet.com.tw
Pin Input Config (PIN)
1. Click on the “Pin Input Config (PIN)” button. If you want to connect to a
specific AP, please choose it in WPS AP List. Or please check Auto.
Then please click “next” button.
2. Remember the PIN code, click “next” button, and click “Start PIN”
button.
Note: Every time you click the tab to change the page, the PIN code will
be changed.
next
next
13
CNet Technology Inc.
www.CNet.com.tw
3. PCI Adapter is waiting for the AP to establish the connection. Enter the
PIN code into the AP that you want to connect. Enter the PIN code into
client pin number and then clicks the “Start PIN” button.
Note: The PIN function in AP should be started before the WPS setup in
PCI Adapter times out.
4. Once the WPS connected successfully, wireless utility will show the
connection status.
14
CNet Technology Inc.
www.CNet.com.tw
Push Button (PBC)
1. Click “Push-Button Configuration(PBC)” button, click next, and “Start
PBC” button.
2. PCI Adapter is waiting for AP to start the PBC function. The AP should
start the PBC function before PCI Adapter WPS times out.
next
15
CNet Technology Inc.
www.CNet.com.tw
3. Once WPS connected successfully, Wireless Utility will show the
connection status.
16
CNet Technology Inc.
www.CNet.com.tw
Link Information
Click Link Information, there are three pages, Link Status,
Throughput, and Statistics.
17
CNet Technology Inc.
www.CNet.com.tw
Profile
Click Profile to enter Profile List. In this page, user can Add, Delete, Edit,
Import, Export, and Add WPS Profile.
Profile
18
CNet Technology Inc.
www.CNet.com.tw
Advanced
Click Advanced and user can choose Country Region Code and
Certificate Management.
19
CNet Technology Inc.
www.CNet.com.tw
About
Click About, and it will show Version and MAC Address.
20
CNet Technology Inc.
www.CNet.com.tw
Uninstalling the software
1. Click on your start menu. Next go to “All Programs”. Next go to the
folder “CNet Wireless LAN Utility”. Next select “Uninstall”.
2. The uninstall window should pop up. Click on “Yes” button.
3. The uninstall process may take a few minutes.
Page is loading ...
Page is loading ...
Page is loading ...
/
