Option 1- Secure female quick connect to
male quick connect. Feed male quick connect
wire through conduit to power supply.
lens
film
Kendo M Graze - Installation Instructions
Please read all instructions prior to installation and keep for future reference!
*LUMINII RESERVES THE RIGHTS TO CHANGE SPECIFICATION & INSTRUCTION WITHOUT NOTICE
Models KMG-
2
Option 2- Feed wire whip to the power supply.
OR
Page 1 of 3
1
1.1 Determine the location of where the fixture(s) will be installed. Lay the fixture(s) on the surface, and make reference marks for the mounting brackets.
Make marks 4" from each end of the fixture(s) and also every 30" in between. (20" if using magnetic mounting clips) (Refer to step 6 for seamless layout,
must be ordered as seamless version to work properly).
1.2 Lay the fixed or adjustable mounting bracket (depends on model ordered) onto the mark points and secure using the provided hardware.
4"
30"
(20" for magnetic clip)
fixture
mark
4"
1.1
surface surface
1.2
fixed mounting bracket
flathead screw
2.1 Snap fixture into the brackets to secure in place. (Refer to step 6
for seamless layout).
2.1
fixed mounting
bracket
fixture
2.2 Remove the protective film
from the diffuser lens.
light fixture
2.2
2.3 Follow one of the two options to connect the fixture to the
power supply.
4.1 Connect +24 VDC red wire from
the fixture to the power supply +24
VDC red wire with a wire nut.
Connect -24VDC black wire from the
fixture to power supply -24VDC
black wire with a wire nut.
4
class II
power
supply
24 VDC
120 VAC
+24 VDC RED
-24 VDC BLACK -24 VDC BLACK
+24 VDC RED
4.1
to fixture
female quick
connect
male quick
connect
to power supply
wire leads
to power supply
1. PRODUCT TO BE INSTALLED BY A QUALIFIED
ELECTRICIAN.
2. USE ONLY WITH CLASS 2 POWER UNIT
3. 24 VOLTS DC
4. SUITABLE FOR DAMP LOCATIONS
5. SURFACE MOUNT ONLY
6. SUITABLE FOR INSTALLATION WITHIN THE CLOSET STORAGE SPACE
7. TYPE IC
8. INHERENTLY PROTECTED
surface
1.2
fixed mounting bracket
flathead screw
7777 Merrimac Ave
Niles, IL 60714
T 224.333.6033
F 224.757.7557
www.luminii.com
OR adjustable
mounting
bracket
adjustable
mounting
bracket
3.1 If applicable, slightly loosen screw on
adjustable mounting bracket and adjust up to
180° and then re-tighten screw to secure
position.
3
3.1
180°
screw
REV0.0 09232019
*LUMINII RESERVES THE RIGHTS TO CHANGE SPECIFICATION & INSTRUCTION WITHOUT NOTICE
5Kendo sample layout
Female and male connector ends
of Y-splitter connects to Kendo
light fixture by carefully pushing
into Kendo light fixture connector
ends.
linking cable types
12.00 part # LC-12
48.00 part # LC-48
120.00 part # LC-120
female
connector end
Y-splitter
part # LYC
male connector end
female
connector end
female/male
adapter part# FMA
female connector end
Use female/male adapter part
#FMA in installations where two
female connector ends need to be
mated together.
fixed mounting
bracket
to power supply
Kendo M
light fixture
Kendo M
light fixture
Kendo M
light fixture
adjustable
mounting bracket
Please read all instructions prior to installation and keep for future reference!
2. USE ONLY WITH CLASS 2 POWER UNIT
3. 24 VOLTS DC
4. SUITABLE FOR DAMP LOCATIONS
1. PRODUCT TO BE INSTALLED BY A QUALIFIED
ELECTRICIAN.
5. SURFACE MOUNT ONLY
6. SUITABLE FOR INSTALLATION WITHIN THE CLOSET STORAGE SPACE
7. TYPE IC
8. INHERENTLY PROTECTED
7777 Merrimac Ave
Niles, IL 60714
T 224.333.6033
F 224.757.7557
www.luminii.com
Page 2 of 3
Kendo M Graze - Installation Instructions
Models KMG-
REV0.0 09232019
*LUMINII RESERVES THE RIGHTS TO CHANGE SPECIFICATION & INSTRUCTION WITHOUT NOTICE
Please read all instructions prior to installation and keep for future reference!
1. PRODUCT TO BE INSTALLED BY A QUALIFIED
ELECTRICIAN.
2. USE ONLY WITH CLASS 2 POWER UNIT
3. 24 VOLTS DC
4. SUITABLE FOR DAMP LOCATIONS
5. SURFACE MOUNT ONLY
6. SUITABLE FOR INSTALLATION WITHIN THE CLOSET STORAGE SPACE
7. TYPE IC
8. INHERENTLY PROTECTED
7777 Merrimac Ave
Niles, IL 60714
T 224.333.6033
F 224.757.7557
www.luminii.com
REV0.0 09232019
Page 3 of 3
power supplies at the
end of the run
power supplies in the
middle of the run
consecutive layout,
NOT RECOMMENDED
multiple powerfeed layouts
power supply
low voltage wires
fixture 1
fixture 1 fixture 2
low voltage wires
power supply
power supply
low voltage wires
fixture 1
power supply
low voltage wires
fixture 2
Kendo M Graze - Installation Instructions
Models KMG-
-
1
-
2
-
3
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
luminii Kendo M Wet Installation guide
-
-
-
-
-
-
-
-
-