2. Halcyon
  3. EX800 9W Exterior Surface Mount Spot

Halcyon EX800 9W Exterior Surface Mount Spot Installation guide

  • Hello! I've reviewed the user manual for the HALCYON EX800 luminaire. This document provides detailed instructions on installing the luminaire, whether on concrete or wood surfaces. It also emphasizes the importance of a qualified electrician for installation and highlights that the light source is not replaceable. I'm ready to answer your questions about this product and its installation process.
  • What should I do if the cable is damaged?
    Can I replace the light source?
    Who should install this luminaire?
FIG-1 FIG-2-A FIG-2-B
FIG-4
FIG-3 FIG-5
EX800 Concrete Wood board
1
OFF
ON 2
1
OFF
ON 2
ver:1.0
Please make sure the
thickness of the wood
board no less than 5mm
If the external flexible cable or cord of this
luminaire is damaged, it shall be exclusively
replaced by the manufacturer or his service
agent or a similar qualified person in order
to avoid a hazard.
2
1
green/yellow
brown
blue
NL
N
L
0.5-2.5mm² with
release facility
The light source of this luminaire is not
replaceable; when the light source reaches
its end of life the whole luminaire shall be
replaced
2
29MM
64
MM
1
2
3
Freely choose tool
to fix the backstand.
gasket
1
2
1
After screwing backplate
to wall cover screw heads
with silicon sealer.
2
1
140°
355°
for cable/pipe mm: ∅6-13
H05RN-F 3×1.0-1.5mm²
This luminaire must be installed by a qualified
Registered Electrician to prevent damage to
the luminaire and maintain electrical safety.
/